FOSC D3S-25Description The Vertical Hermetic Fiber Optic Splicing Closure is a complete set of accesorries used for connecting permanently two (or more) micro cables or fiber optic cables. After being heated, a heat shrinkable fixing sleeve is used to fix and seal the inlet/outlet tube and fiber cable. A closure is installed in a vertical position. Its strong housing and the main components make the closure fire resistant, waterproof and quakeproof, and protect the fibre-optic fusion splices against pulling, torsion and impact. It can be deployed in aerial, underground, wall-mounting, hand hole-mounting and duct-mounting applications. FOSC D3S-25III equipment with FOST D24III splice trays allows to install 6 splitters in ABS housings. » High quality ABS material » Airtight closure » Cable port: 10 x 020 mm +1 x 040 mm » Core capacity: 168 » Metal handles of the central element » Size (H x D): 495 x 0276.6 mm DJS-251 Vertical Hermetic Fiber Optic Splicing Tray DJS-25II Vertical Hermetic Fiber Optic Splicing Tray DJS-25III Vertical Hermetic Fiber Optic Splicing Tray DIN24 Splice Tray (24 cores) Cassettes with possibility adapters mounting (max 10 SC simplex adapters) Cassettes with possibility splitters mounting (max 3 splitters) » DJS-251 holds up to 7 FOST D24I cassettes » DJS-25II holds up to 6 FOST D24I and 1 FOST D24II C3SsettGS » DJS-25III holds up to 2 FOST D241,1 FOST D24II and up to 2 FOST D24III cassettes » FOSC is packed in cardboard box Standard equipment » Seal type (1 roll) »Insulation type (1 roll) » Abrasive cloth (1 pc) » Earthing wire (2 sets) » Nylon tie (1 bag) » Labeling paper (1 pc) » Measuring paper (1 pc) » Desiccant (1 bag) » Special wrench (2 pcs) » Hose clamp I (12 pcs) » Hose clamp II (2 pcs) » Elastic ring (11 sets) Fiber Optic Splicing Closures for FTTH