TECHNICAL DATA SHEET Acetoxy curing, 1-component silicone sealant (RTV-1) Very easy to apply Excellent adhesion to almost all building materials Permanent elasticity Has a high resistance to ageing, weather conditions, low and high temperatures and UV Discoloration proof Has an adhesive strength on the majority of materials used in building and engineering industries such as glass, ceramic tiles, etc. A primer is recommended for porous surfaces. Industrial applications as sealant in the automotive, shipbuilding industries, coach work, caravans, etc. TECHNICAL CHARACTERISTICS Uncured sealant Type of sealant Vulcanising system Skin forming time (23°C and 50% R.H.) Processing temperature Shelf life, in the original packing in dry conditions between +5°C - +25°C Cured sealant Shore A hardness: ISO 868 Temperature resistance PACKING AND COLOURS 25 cartridges of 310 ml/box - 48 boxes/pallet RAL 9011 black, white, transparent. Other colours are available on request. METHOD OF USE Preparation All surfaces should be dry, clean and free from dust or grease. When necessary, degrease with Parasilico Cleaner, MEK, alcohol or ethanol. If necessary, use a primer. It is recommended to carry out preliminary tests in order to determine the suitability of the product for its application. Primers Porous surfaces Curing time (approx.) 60 min Curing time (approx.) 30 min Application This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply. DL Chemicals nv Roterijstraat 201-203 - Zone 5 Snepbeek - 8793 Waregem - Belgium T +32 56 62 70 51 - F +32 56 60 95 68 [email protected] - www.dl-chem.c

With a gun (manual or pneumatic). The shape of the joint is important. Avoid thin layers. Good ventilation is important during application and vulcanisation of the product. During vulcanization, a total of 4% acetic acid is released. These cross linker vapours may not be inhaled during long periods of time or in high concentrations. Joint dimensions Joint width Joint depth Allowed difference Maximum joint width: 30 mm Tooling When needed with DL100 or tools. Cleaning Before curing: Tools with white spirit or solvent. Surfaces with Parasilico Cleaner. After curing: Remove as much as possible mechanically;...