TECHNICAL DATA SHEET Permanently elastic joint and adhesive sealant Can absorb movements up to 25% Very easy to apply Excellent adhesion to almost all building materials Adheres to slightly moist surfaces May be used on natural stone Can absorb movements up to 25% Solvent, isocyanate and phthalate free Good resistance to weather conditions and low and high temperatures Can be painted over with most water and solvent based paints Can be used indoors and outdoors. Suitable for horizontal and vertical connection joints as well as expansion joints of up to 50 mm wide. Suitable for gluing roof tiles, skirting boards, stair steps, thresholds... Suitable for sealing and bonding in construction, industry and automobile industry. Has an excellent adhesion to most materials such as wood, concrete, metals, anodized aluminium, natural and artificial stone. A primer is recommended on absorbent surfaces. TECHNICAL CHARACTERISTICS Uncured sealant Type of sealant Silyl modified polymers Curing system Skin forming time (23°C and 50% R.H.) Processing temperature Shelf life, in the original packing in dry conditions between +5°C - +25°C Cured sealant Shore A hardness : ISO 868 Temperature resistance PACKING AND COLOURS 25 cartridges of 290 ml/box - 48 boxes/pallet White, RAL 7004 grey, black 20 sausages of 600 ml/box - 45 boxes/pallet White, RAL 7004 grey, black METHOD OF USE Preparation All surfaces should be dry, clean and free from dust or grease. When necessary, degrease with Parasilico Cleaner, MEK, This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply. DL Chemicals nv Roterijstraat 201-203 - Zone 5 Snepbeek - 8793 Waregem - Belgium T +32 56 62 70 51 - F +32 56 60 95 68 [email protected] -

alcohol or ethanol. If necessary, use a primer. It is recommended to carry out preliminary tests in order to determine the suitability of the product for its application. Primers Primer DL 2001 Drying time (approx.) 20 min Application • Use in well-ventilated rooms. Good ventilation is important during application and vulcanisation of the product. • As adhesive: Apply Paraflex 40 with the supplied nozzle in strips or dots to the base or on the element to be bonded. The strips must be applied in vertical rows. Apply the strips parallel to each other, to allow the humidity to reach the adhesive...