PARACOL UNIVERSAL FLOORING TECHNICAL DATA SHEET Versatile dispersion adhesive for flexible floor coverings like vinyl, PVC, linoleum flooring, carpet, cork, rubber... Water based Ready to use Very easy applicable Adheres powerfully and quickly, also to impermeable floor coverings Peel resistant Does not harm (end) user’s health Solvent free Non-flammable Bonding of horizontal flexible floor coverings indoor, on absorbent and non absorbent surfaces. Bonding of LVT (luxury vinyl tiles) and VCT (semi-hard vinyl floor tiles). Bonding of homogeneous and heterogeneous PVC floor coverings in bands. Bonding of linoleum. Bonding of carpet. Bonding of cork. Suitable for underfloor heating, if the subfloor is dry. TECHNICAL CHARACTERISTICS Base Acrylic dispersion Specific weight Application temperature Waiting time Open time Time until floor can be threaded Time until floor can be used Shelf life, in the original packing in dry conditions between +5°C and +30°C. PACKING Bucket 6 kg* - 60 buckets/pallet - *On demand, per full batch Bucket 14 kg - 33 buckets/pallet This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply. DL Chemicals nv Roterijstraat 201-203 - Zone 5 Snepbeek - 8793 Waregem - Belgium T +32 56 62 70 51 - F +32 56 60 95 68 [email protected]

Choice of glue comb Type of floor covering Serration of glue comb Floor covering with solid back Floor covering with uneven back Floor covering with rough back Application On absorbent surfaces: the semi-wet bonding method • Apply the adhesive evenly on the surface using a suitable glue comb. Do not spread more adhesive than can be applied within the open time (40 minutes). • Place the floor covering after a short wait of 20 minutes. If the adhesive bead has dried superficially, then the tack is not still minute. • After application, rub on the floor covering to ensure proper full-surface distribution...