PARACOL TUILE TECHNICAL DATA SHEET One-component adhesive Based on special elastomers For flexible bonding of pantiles In special roofing tile colour Glue roofing tiles on one another, on wooden laths, on cement fibreboards and on roofing sheets. Not necessary to fix the tiles with nails or cement. Also for joints between construction elements. TECHNICAL CHARACTERISTICS Uncured sealant Type of sealant Vulcanising system Skin forming time (23°C and 50% R.H.) Processing temperature Shelf life, in the original packing in dry conditions between +5°C - +25°C Cured sealant Shore A hardness : ISO 868 Temperature resistance PACKING AND COLOURS 25 cartridges of 290 ml/box - 48 boxes/pallet Red stone colour Other colours are available on request (75 cartridges or multiples). METHOD OF USE Preparation The surfaces have to be clean and dry. Primers If necessary use a primer Primer DL 783. It is advised to test adhesion before starting the work. If necessary contact our technical service. Application With a manual or pneumatic gun. Cleaning Before curing: Tools with white spirit or solvent. Surfaces with Parasilico Cleaner After curing: Remove as much as possible mechanically; the remainders of the silicone with Silicone Remover. This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply. DL Chemicals nv Roterijstraat 201-203 - Zone 5 Snepbeek - 8793 Waregem - Belgium T +32 56 62 70 51 - F +32 56 60 95 68 [email protected] - www.dl-chem.com

Repairing With the same product. Please refer to safety data sheet which is available on request. TECHNICAL APPROVALS CEBTP: Report n° B252.3.078/1: tests according to NF P 85-611 « adhesives for bonding pantiles ». This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions...