TECHNICAL DATA SHEET One-component ethyl-cyanoacrylate adhesive Fast cure on the majority of industrial surfaces Medium viscosity adhesive (fluid) Cures very rapidly at room temperature Excellent humidity resistance Maintains its strength at low temperatures Solvent free Suitable for bonding plastics, rubber, wood, paper, leather, metal Plastics which are hard to bond, such as PP, PE, PTFE and silicone rubbers, use the Paracol Superglue F in combination with the Paracol Superglue Primer. TECHNICAL CHARACTERISTICS Base Mixture of ethyl cyanoacrylate Flash point Specific gravity Temperature resistance Shelf life, in the original packing in a dry place between +5°C Min. 12 months and +25°C Tensile strength (ISO 6922) PACKING 10 bottles of 20 g/box METHOD OF USE Preparation All surfaces to be bonded should be degreased with a solvent such as acetone, MEC. Application • Apply a drop to one of the surfaces to be bonded • Assemble immediately, light contact pressure is needed to prevent movement and minimize bond gap • Cure can be achieved within 10 seconds in most cases • The maximum strength is achieved after 24 hours Safety data sheet available on request This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply. DL Chemicals nv Roterijstraat 201-203 - Zone 5 Snepbeek - 8793 Waregem - Belgium T +32 56 62 70 51 - F +32 56 60 95 68 [email protected] - www.dl-