PARACOL STRATI/G TECHNICAL DATA SHEET Contact glue based on poly-chloroprene and high quality resins in a mixture of organic solvents Designed for vertical gluing Without dripping or smudging. Thixotropic pasty Great adhesion Indoor use Is used on laminated or stratified panels, rubber or plastic selectionnals, wood, veneering, agglomerates, plywood, fibro-cement, metals, cork, phenolic foam, polyurethane, pasted materials on concrete, asbestos cement, plaster on metal, or combination of any of these elements. TECHNICAL CHARACTERISTICS Colour Temperature resistance Shelf life, in the original packing between 15°C and 20°C. In case of seepage or condensation, pour out few drops of solvent from the surface. This operation does not bring any damage to the quality of the product. Application temperature PACKING 12 cans of 750 ml/box - 50 boxes/pallet Can 5 l - 108 cans/pallet METHOD OF USE Preparation Surfaces must be dry, free of dust and any contaminating substances. Application • Spread The glue with a brush or a spatula. • Spread a smooth layer of glue (150 g) on the two surfaces to be bonded. • Let solvents escape (7 to 15 min. according to temperature and surfaces). • The elements to be glued can be pressed together as soon as the glue does not stick to the fingers anymore. • Press the two parts together very precisely as the setting power is immediate and irreversible. After the pressing it is no longer possible to correct • Maximum adherence is achieved after 48 to 72 hours. Cleaning With acetone Safety data sheet available on request This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply. DL Chemicals nv Roterijstraat 201-203 - Zone 5 Snepbeek - 8793 Waregem - Belgium T +32 56 62 70 51 - F +32 56 60 95 68 [email protected] - www.dl-

This glue cannot be used with polystyrene. TECHNICAL APPROVALS * Information sur le niveau d’émission de substances volatiles dans l’air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A+ (très faibles émissions) à C (fortes émissions). This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for...