1. Catalogs
  2. DL Chemicals
  3. PARACOL STRATI/F

PARACOL STRATI/F

PARACOL STRATI/F

Product catalog summary
Technical Data Sheet Overview
Characteristics: Paracol Strati/F is a contact glue based on polychloroprene, high-quality resins, and special solvents. It is a liquid adhesive known for its great adhesion properties, suitable for indoor use.
Applications: This adhesive is ideal for bonding stratified or laminated panels, rubber or plastic sectionals, leather, wood, veneer, agglomerates, plywood, cork, fibro-cement, mineral wools, and metals, either on themselves or in combination.
Technical Characteristics: The glue is brown-beige in color, stands frost, is flammable, and has a density of 0.90 g/cm³ at 20°C. The application temperature should be above 10°C, ideally between 18° - 20°C, with a temperature resistance of up to 85°C. It has a shelf life of at least 18 months when stored in original packing under dry conditions at ambient temperatures.
Packing: Available in 12 cans of 750 ml per box, with 50 boxes per pallet, or in 5-liter cans with 108 cans per pallet.
Method of Use: Surfaces must be dry, clean, and free from dust or grease. Stir the glue before use, apply with a brush or spatula, and let it dry for 15 to 30 minutes. Press the glued elements together once the glue is no longer sticky to the touch. Apply strong pressure across the surface. Final adherence is achieved after 48 hours. Clean with acetone.
Safety: A safety data sheet is available upon request.
Limitations: Not suitable for use on foamed polystyrene.
See more

Catalog excerpts

PARACOL STRATI/F-1

PARACOL STRATI/F TECHNICAL DATA SHEET Contact glue based on polychloroprene, high quality resins and a mixture of special solvents. Liquid Great adhesion Indoor use Bonding stratified or laminated panels, rubber or plastic sectionals, leather, wood, veneer, agglomerates, plywood, cork, fibro-cement, mineral wools, metals on themselves or in combination. TECHNICAL CHARACTERISTICS Colour Stands frost Application temperature Temperature resistance Shelf life, in the original packing in dry conditions at ambiant temperatures PACKING 12 cans of 750 ml/box - 50 boxes/pallet Can 5 l - 108 cans/pallet METHOD OF USE Preparation All surfaces need to be dry, clean and free from dust of grease. Application • Stir the glue before using (opening time max. 45 minutes), and then apply it with a brush or a spatula. • Let dry for 15 to 30 minutes, this time spread cannot be more precise as it depends on materials, temperature, and hygrometry. • The elements to be glued can be pressed together as soon as the glue does not stick to the fingers anymore. • A strong pressure should be applied to the whole surface. • After the pressing it is no longer possible to correct • Final adherence is achieved after 48 hours. Cleaning With acetone Safety data sheet available on request Not appropriate for use on foamed polystyrene TECHNICAL APPROVALS * Information sur le niveau d’émission de substances volatiles dans l’air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A+ (très faibles émissions) à C (fortes émissions). This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply. DL Chemicals nv Roterijstraat 201-203 - Zone 5 Snepbeek - 8793 Waregem - Belgium T +32 56 62 70 51 - F +32 56 60 95 68 [email protected] -

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.