TECHNICAL DATA SHEET MS-polymer based adhesive sealant Does not affect the back of mirrors Solvent free, Permanently elastic Very high initial tack Fast curing For bonding all types of mirrors. For fixing special kinds of mirrors a test is recommended Forms a permanent water-tight and weatherproof bond to many surfaces such as glass, aluminium, etc. TECHNICAL CHARACTERISTICS Uncured sealant Type of sealant Vulcanising system Skin forming time (23°C and 50% R.H.) Shelf life, in the original packing in dry conditions between +5°C - +25°C Min. 12 months - 6 months when opened Cured sealant Shore A hardness : ISO 868 Temperature resistance PACKING AND COLOURS 25 cartridges of 290 ml/box - 48 boxes/pallet Grey Other colours are available on request (75 cartridges or multiples). METHOD OF USE Preparation The surfaces must be clean, dry, sound and free of dust. Primers On porous surfaces a primer is recommended Application • Heavy mirrors should be supported for several hours. • The adhesive must be applied in vertical lines of max. 15 mm wide. • Between the mirror and the wall a space of at least 2 - 3 mm must be respected. Cleaning Before curing: Tools with white spirit or solvent. Surfaces with Parasilico Cleaner After curing: Remove as much as possible mechanically; the remainders of the silicone with Silicone Remover. This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply. DL Chemicals nv Roterijstraat 201-203 - Zone 5 Snepbeek - 8793 Waregem - Belgium T +32 56 62 70 51 - F +32 56 60 95 68 [email protected] - www.dl-che

Please refer to safety data sheet which is available on request. TECHNICAL APPROVALS * Information sur le niveau d’émission de substances volatiles dans l’air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A+ (très faibles émissions) à C (fortes émissions). This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product...