PARABOND TRANSPARENT TECHNICAL DATA SHEET Universal MS-polymer based adhesive sealant Crystal clear transparency Bonding and sealing Extremely strong when completely cured Bonds also with slightly moist supports Does not cause any corrosion in metal joints Suitable for use with natural stone Solvent and isocyanate free Paintable with most water and solvent based paints Permanently elastic Ideal for all jointing and gluing work where transparency is necessary (eg. sticking handles on glass doors, in bathrooms, kitchens, etc). Ideal for "invisible" bonding and sealing of different colored substrates and transparent materials for indoor applications. Suitable for sealing seams and connecting joints indoors. Bonds without primer on almost all materials used in the construction industry, such as aluminium, galvanized and stainless steel, zinc, copper, natural stone, concrete, brick, HPL panels, treated wood, gypsum, glass, various synthetic materials, etc. TECHNICAL CHARACTERISTICS Basic ingredient Curing system Skin formation time (23°C and 50% R.V.) Processing temperature Shelf life, in the original packing in dry conditions between +5°C - +25°C 12 months Shore A hardness: ISO 868 Joint movement capacity: ISO 11600 Solvent and isocyanate content Temperature resistance Extremely good moisture resistance and not sensitive to frost PACKING AND COLOUR 25 cartridges of 290 ml/box - 48 boxes/pallet 80 tube packaging of 75 ml/box - 40 boxes/pallet (3200 pieces) - on request and with a MOQ of 1000 pieces 119 foil packaging of 80 ml with applicator/box - 30 boxes/pallet (3570 pieces) On request and with a MOQ of approximately 2500 pieces 119 foil packaging of 100 ml with applicator/box - 30 boxes/pallet (3570 pieces) On request and with a MOQ of approximately 2000 pieces Transparent This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply. DL Chemicals nv Roterijstraat 201-203 - Zone 5 Snepbeek - 8793 Waregem - Belgium T +32 56 62 70 51 - F +32 56 60 95 68 [email protected] - www.d

METHOD OF USE Preparation The materials to be joined must be clean and free from dust and grease. If necessary, degrease using Parasilico Cleaner, MEK, alcohol or ethanol. The support must be fixed and rigid enough. The support may be slightly damp. Primers For strongly absorbent supports it is recommended to use DL 2001 Primer. It is advisable to do bonding tests. It is the user’s responsibility to check whether the product is suitable for his application. Our technical department could be consulted. Application • Proper ventilation during processing and during the hardening is important. •...