PARABOND SPRAYABLE TECHNICAL DATA SHEET MS-polymer based adhesive sealant Gluing of a solid area Ideal for big surfaces Easily sprayable Adheres also on slightly damp surfaces Makes it possible to work quickly and efficiently Less consumption Odourless Solvent and isocyanate free, phthalate free HIgh resistance against aging, UV, weather conditions, low and high temperatures (-40°C-+90°C) Permanent elasticity TECHNICAL CHARACTERISTICS Basic ingredient Curing system Skin formation time (23°C and 50% R.V.) Processing temperature Shelf life, in the original packing in dry conditions between +5°C- 25°C 12 months Shore A hardness : ISO 868 Volume loss after vulcanisation Solvent & isocyanate content Temperature resistance Moisture resistance Extremely good moisture resistance Frost sensitivity PACKING AND COLOURS 25 cartridges of 290 ml/box - 48 boxes/pallet - *On demand and per full pallet 20 sausages of 600 ml/box - 45 boxes/pallet - *On demand and per full pallet Grey* Other colours are available on request (75 cartridges or multiples). This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply. DL Chemicals nv Roterijstraat 201-203 - Zone 5 Snepbeek - 8793 Waregem - Belgium T +32 56 62 70 51 - F +32 56 60 95 68 [email protected]

METHOD OF USE Preparation The support must be dry and clean. The support may be slightly damp. The materials to be joined must be clean and free from dust and grease. If necessary, degrease using Parasilico Cleaner, MEK, alcohol, or ethanol. Primers If required, apply DL 2001 Primer first. We recommend to do preliminary adhesion tests. The user should verify himself if the product is fit for his application. Contact our technical service if necessary. Application • For gluing big surfaces: the adhesive is sprayed equally over the full surface by means of the Jetflow 3 (Cox)) pneumatic sealant...