PARABOND MARINE PARQUET TECHNICAL DATA SHEET Hybrid polymer based adhesive sealant For use in the shipping industry and sealing of parquet Bonds also with slightly moist supports Does not cause any corrosion in metal joints Suitable for use with natural stone Solvent, isocyanate and phthalate free Can be sanded Paintable with most water and solvent based paints Permanently elastic U.V. and weather-resistant High resistance against sea water in case of non-continuous immersion. For interior and exterior use. As a universal glue and adhesive for use in the shipping industry and sealing of parquet, extremely suitable for sealing horizontal (and vertical) floor joints in decks of ships and connecting joints for parquet. Waterproof sealing of seams in teak-wood decks, bonding and sealing of skirting boards, gluing of cornices, sealing of deck/hull joints, gluing and sealing of portholes and hatches. Bonds without primer on almost all materials used in the construction industry, such as aluminium, galvanized and stainless steel, zinc, copper, natural stone, concrete, brick, HPL panels, treated wood, gypsum, glass, various synthetic materials, etc. TECHNICAL CHARACTERISTICS Basic ingredient Hybrid polymer Curing system Skin formation time (23°C and 50% R.V.) Processing temperature Shelf life, in the original packing in dry conditions between +5°C - +25°C 12 months Shore A hardness : ISO 868 Joint movement capacity : ISO 11600 Solvent & isocyanate content Temperature resistance Extremely good moisture resistance and not sensitive to frost PACKING AND COLOURS 25 cartridges of 290 ml/box - 48 boxes/pallet Oak, black Other colours are available on request (75 cartridges or multiples). This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply. DL Chemicals nv Roterijstraat 201-203 - Zone 5 Snepbeek - 8793 Waregem - Belgium T +32 56 62 70 51 - F +32 56 60 95 68 [email protected] - www.dl-chem.com

METHOD OF USE Preparation The support must be fixed and rigid. The support may be slightly damp. The materials to be joined must be clean and free from dust and grease. If necessary, degrease using Parasilico Cleaner, MEK, alcohol, or ethanol. Primers For strongly absorbent supports it is recommended to use DL 2001 Primer. It is advisable to do bonding tests. It is the user’s responsibility to check whether the product is suitable for his application. Our technical department could be consulted. Application • Proper ventilation during processing and during the hardening is important. • Apply...