PARABOND CONSTRUCTION TECHNICAL DATA SHEET Universal MS polymer based adhesive sealant Jointing and gluing Bonds also with slightly moist supports Suitable for use with natural stone Does not cause any corrosion in metal joints Paintable with most water and solvent based paints Extremely strong and permanently elastic Excellent U.V., weather and aging resistance Solvent, isocyanate and phthalate free For interior and exterior use. All jointing where flexibility is important: - Sealing of horizontal and vertical expansion and connection joints (max. width 50mm). - Sealing of joints and cracks in car, caravan, train and bus construction, in containers, in air-conditioning installations... - Sealing between frame and wall, connection joints of window and door frames, in facades and shop fronts... - Sealing and gluing work in veranda’s, kitchens, etc. - Sound proofing between concrete and drain pipes. Gluing and sealing of skirting boards, steps, doorsteps, protective profiles, covers, prefab elements... Bonds without primer on almost all materials used in the construction industry, such as aluminium, galvanized and stainless steel, zinc, copper, natural stone, HPL panels, treated wood, gypsum, various synthetic materials, glass (not for glazing joints), etc. Can also be used on absorbent surfaces such as concrete and brick. A primer is recommended for optimal adhesion. Meets the requirements of FDA code 21 §177.2600 (e) for food contact. TECHNICAL CHARACTERISTICS Basic ingredient Curing system Skin formation time (23°C and 50% R.V.) Processing temperature Shelf life, in original packing in dry conditions between +5°C - +25°C 12 months Shore A hardness: ISO 868 Joint movement capacity: ISO 11600 Water vapour permeability: ISO 15106 Solvent & isocyanate content Temperature resistance Very good moisture resistance and not sensitive to frost This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply.

PACKING AND COLOURS 25 cartridges of 290 ml/box - 48 boxes/pallet Standard (with SNJF): White, black, Ral 7004 (signal) grey Standard: Ral 1013 pearl white, Ral 1019 grey beige, Ral 7005 mouse grey, Ral 7016 anthracite grey, Ral 7023 cement grey, Ral 8007 light brown, Ral 8016 dark brown, Ral 9001 cream, basalte, dark beige, natural stone, terracotta 20 sausages of 600 ml/box - 45 boxes/pallet White, black, grey beige Ral 1019, Ral 7004 (signal) grey, Ral 7005 mouse grey, Ral 7016 anthracite grey, Ral 7023 concrete grey, Ral 7030 stone grey, Ral 7032 pebble grey, Ral 8016 dark (mahogany) brown,...

Painting Paintable with most water and solvent based paints. Can be painted wet on wet. After 48 hours, the surface must be cleaned first before it can be painted. Pre-testing is necessary. Alkyd paints might require an extended drying time. Please consult the safety data sheet online: www.dl-chem.com. Permanent exposure to high relative humidity may cause fungal growth. Not suitable for joints with a width or depth < 5 mm. No adhesion on PE, PP, PA, PTFE (Teflon®) and bituminous substrates. On bituminous surfaces: use Paraphalt. On polycarbonate and polyacrylate: use Parasilico PL. Not suitable...