TECHNICAL DATA SHEET Linseed oil and calcium carbonate based putty Has to be over painted: must be painted as soon as the putty has formed a skin firm enough to accept the actions of overcoating. Apply the first coat within 7 - 21 days. Apply the final coat within 28 days. Good adherence Does not shrink Suitable for external use only. Ideal for glazing of single glass into wooden, steel and concrete frames. For the application in iron, a hardener is obliged. For a fast curing, you have to mix OO Extra with hardener according to the instructions. For non porous windows, always add hardener. TECHNICAL CHARACTERISTICS Character Good adherence to dry and clean surfaces Over painting Must be over painted within 1 month with a synthetic paint or oil paint. Also suitable for water-based paint. Joint dimension Processing temperature Shelf life, if stored in unopened packaging and original con- 12 months tainer in cool and dry conditions Linseed oil putty 00 Extra brown: idem, by adding 1.5 % of oxide brown. PACKING AND COLOURS 24 pots of 500 g/box White, brown 12 pots of 1 kg/box White, brown Pack of 5 kg White, brown* (*Available until the depletion of the current stock) Pack of 10 kg White, brown METHOD OF USE Preparation • Ensure that all components in the glazing system are compatible. • Remove all dust, grease and loose material. Substrate must be dry. • Pretreatment of the substrate is required: varnish or primer. • Apply the putty in the traditional way. Safety data sheet available on request. This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply. DL Chemicals nv Roterijstraat 201-203 - Zone 5 Snepbeek - 8793 Waregem - Belgium T +32 56 62 70 51 - F +32 56 60 95 68 [email protected] - www.dl-ch

Do not use in double glazing, stratified glass, plexi, polycarbonate or when contact with silicone. In case of non porous substrates, the use of a hardener is obligatory, otherwise the putty will vulcanise very slowly. Do not use paints with strong solvents such as xylene. TECHNICAL APPROVALS * Information sur le niveau d’émission de substances volatiles dans l’air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A+ (très faibles émissions) à C (fortes émissions). This technical data sheet replaces all previous editions. The data on this sheet have...