Composites
48Pages

DESIGN - MANUFACTURE - SUPPLY Worldwide Diamond Tooling Solutions

THE COMPANY D.K. Holdings Limited has been manufacturing diamond tools and associated products since 1959. We have developed a unique expertise in producing and supplying diamond tooling specifically for the composites industry. ISO 9001 QUALITY STANDARD Our products are made to the highest quality standards. We are accredited with the approved quality management system BS EN ISO 9001 : 2015 for manufacture and supply of our products. DIAMOND TOOLS Electroplated, electroformed, metal bond and resin bond diamond tools are used on various materials because of very fast clean cutting, long...

Bandsaw Blades Bosch Jigsaw Machine Calibration Drums Chamfer Rings Chamfer Wheel Core Drills Diagrit Water Chucks D-Loc Discs Dome Ended Routers Drill Countersinks Electroflex Belts Electroflex Discs Electroflex Drums Electroflex Hand Files Electroflex Hand Pads Groove Wheel HAND MACHINES Hand Pads Holesaw Arbors Jigsaw Blades Jigsaw Machine Mandrels, D-Loc Narrow Belts Needle Files Oscillating Blades Parallel Routers Pendulum Blade Piercing Routers Plastic Wedges Fein Oscillating Machine Fein Oscillating Blades Fein Triangular Pads GRP/GRE Pipe Tools Hand Files (Electroflex) Integral...

Re-dress Service Reka Tools Routing Machine Special Tools Surface Planers Technical Specifications Titan Dry Grinding Discs Trimming Machine Vortex Cutters Water Chucks Wind Turbine

DK DIAMOND SAWS FOR THE COMPOSITES INDUSTRY As one of the world leaders in diamond blade technology we are pleased to offer a complete range of high quality diamond blades for the Composites Industry. We offer the majority of our blades from stock but we also have the ability to manufacture a diamond blade to your specifications/requirements. APPLICATIONS CONTINUOUS RIM: SIDE SPOKE: GULLETED: PYRAMID: Forfast straight line cutting with long life - see page 2. Engineered to cut curves withoutjamming - see page 3. Fast cutting with gullets allowing cooling action - see page 4. For straight...

CONTINUOUS RIM SAWS Forfast straight cutting of materials. Can be used in hand tools or on stationary machines at speeds between 1500 and 3000 surface metres per minute. NOTE: Can be supplied in a variety of diamond grades and widths. Normally saws over 40mm diameter are coated with 3mm down the sides and the larger saws have a deeper coating. Saws are made with bore sizes to suit customers’ requirements which should be stated on order. Saws coated in 36/44 grit are approximately 0.4mm wider than nominal width. CONTINUOUS RIM DIAMETER WIDTH CODE (mm) (mm) 36/44 NOTE: Other sizes...

SAWS allows the blade to cut curves customers’ requirements which should be stated on order. made with ,4mm wider than nominal width. SIDE SPOKE DIAMETER WIDTH (mm) (mm) Saws coated in 36/44 grit are approximately 0 3 SPOKES EACH SIDE CODE CODE ELECTROPLATED DIAMOND SIDE SPOKE SAW ESS770 NOTE: Other sizes available, prices on request. Technical Specification: Page When ordering please state Code. 'Denotes ex-stock OTHER RELATED PRODUCTS HANDMACHINES-Pages 30-31

NOTE: Can be supplied in a variety of diamond grades and widths. Normally saws are coated a minimum 3mm down the sides and are mad on order. Saws coated in 36/44 grit are approximately 0.4mm wider than nominal width SAWS WIDTH (mm) NOTE: Other sizes available, prices on request. ELECTROPLATED DIAMOND GULLETED BLADE Technical Specification: Page 38 OTHER RELATED PRODUCTS HAND MACHINES-Pages 30-31 Quantity Discounts Saws under 300mm 300mm Saws and over

CORRUGATED TOOTHED SAW Diamond coated 44/60 saw with serrated teeth for Kevlar®, Twaron® and Aramid fibres and also recommended for Carbon/Kevlar and Glass/ Kevlar woven composite materials. The serrated teeth help to shear the fibre. OPTIONS: Diameters - 50-200mm __% CORRUGATED TOOTHED SAW DIAMETER WIDTH CODE (mm)_(mm)_44/60 SERRATED TOOTHED PYRAMID SAWS For heavy duty hand trimming and sawing on GRP mouldings and other applications. Allows “side grinding “ as well as cutting saws are made with bore sizes to suit customers’ requirements which should Saws coated in 36/44 grit are...

CONTINUOUS & SIDE SPOKED INTEGRAL SPINDLE SAWS INTEGRAL SPINDLE SAWS Used where it is necessary to cut close into a corner and where a way. The blade and spindle arc made in one piece and present an absolutely flush side to the work. Can be supplied in a variety of diamond grades and widths. saws are coated a nominal 2mm down the sides. Please state shank diameter and length when ordering. Saws coated grit are approximately 0.4mm wider than nominal width &PENDULUM Technical Specification: Page 38 OTHER RELATED PRODUCTS Other sizes available, prices on request.

BANDSAW BLADES Diamond coated bandsaws are made from high quality steel with the leading edge coated with diamond giving a continuous ribbon of aggressive cutting action. Both straight cut and curves can be easily achieved, bearing in mind the tighter the curve required, the narrower width of bandsaw needed. Supplied ready welded to your exact required length or available in coils up to 39 metres long. OPTIONS: Continuous Coated Castellated Edge (for thicker materials) Blade Widths 12,19, 25mm BANDSAWS 12,19 & 25mm Widths GRADE per metreper foot 36/44_ Tension Gauge JIGSAW BLADES Diamond...

when cutting holes in composites. SPECIAL HOLESAWS Side Ejection - provides a very rapid method of dry cutting holes in GRP mouldings and laminates. Type 2 - Piloted with Soring Operated Core Ejection - for ease of location with core ejecting by means of a spring loaded plunger. HSS/Tungsten Carbide drill or plain pilot available. Technical Specification: Page 38 under 25mm diameter where limited interi will not accommodate a standard internal

STANDARD HOLESAWS CODE (Starrett type fitting - Electroplated) holesaws coated in 36/44 diamond Holesaws furnished without arbors unless specified. Standard drilling depths; with pilot and ejector spring 15mm, without pilot and ejector For customers requiring deeper drilling depth, NOTE: Other sizes available, prices on request. HOLESAWS ACCESSORIES ARBORS CHUCK STANDARD 36/44GRIT DIAMOND HOLESAWS PILOT DRILL ARBOR DESCRIPTION Tungsten Carbide Drill - 0 6.5mm EJECTORSPRING DESCRIPTION Ejects slug out of holesaw A2ARBOR When ordering please state Technical Specification: Page 38