SENSING ENGINEERING INNOVATION IH-01-50 IEPE Instrumented Impact HammerMeasuring range 50N The IH-01-50 impact hammer belongs to a range of general purpose hammers used for structural health testing, resonance determination and modal analysis, the IH-01-50 itself being suitable for testing of lightweight structures such as PCB's. Included within the hammer is a piezoelectric IEPE force sensor in which directly outputs a voltage signal. Each hammer is supplied as a kit including a cable and a variety of tips able to suit a variety of testing requirements, the IH-01-50 terminating with a M5 microdot connector. Impact pulse width and frequency response is different with different hammer heads and tips. Other options include a wide range of accelerometers and cabling to suit any type of structural test. Please note: For information and reference only. Data should not be used as pass/fail criteria for calibration purposes. Finchley Avenue, Email [email protected] Mildenhall, Suffolk IP28 7BG Web www.djbinstruments.com A UK company with UK-based manufacturing, assembly and calibration in-house.