A/161, A/161-1, A/162, A/162-1, A/163-1 Series High Shock IEPE Accelerometers 0.1/0.2/0.5 mV/g ±10% 8/10/16gm wt. 121 °C Max Developed for demanding applications requiring the measurement of high amplitude, short duration transient events such as pyrotechnic shock or high energy impacts, the A/16X range of stainless steel IEPE accelerometers have a range from 10,000g up to 50,000g The design of our more standard accelerometers have limitations when used for shock applications, these can either be due to the short duration of the transient event or due to the high level of the shock amplitude, either of these elements can cause issues for the standard sensor and hybrid electronics used in the IEPE accelerometers. To overcome these issues the A/16X range has in built filters which ensure the response is linear across a wide frequency band up to (1Hz to 15kHz) and up to a peak amplitude measurement of 50,000g. The A/16X range is also designed to withstand over testing, the accelerometers have a physical built in protection up to 60,000g, (depending on version) this is necessary due to the highly variable and sometimes unpredictable nature of pyrotechnic events. A/161 - M5 Microdot connector A/161-1 - Integral Cable A/162 - M5 Microdot connector A/162-1 - Integral cable A/163-1 - Integral cable Other applications requiring high transient acceleration measurements can include: Temperature Response Typical Frequency Response • Pile Driver Monitoring • Simulated Pyroshock Event • Recoil and Penetration • Impact Press Monitoring • Explosive Studies • Armour Piercing DJB Instruments (UK) Ltd Finchley Avenue, Mildenhall, Suffolk IP28 7BG A UK company with UK-based manufacturing, assembly and calibration in-house.