AT/13 Triaxial Voltage O/P Accel. 10/100mV/g The AT/13 has been developed primarily for the Modal Analysis and Structural test marketplace with particular focus on the Automotive and Aerospace markets. The slotted sides and a slotted base allow it to be mounted on 5 of its faces by sliding into the accompanying clip. Users can then mount the clips using normal glue methods and slide the accelerometers in and out of the clip as required. This ensures perfect repeatability for tests without the need for leaving the accelerometer in situ. In addition, for large channel count testing, all accelerometers can be mounted in the same orientation making software set up easier. Sensitivity Deviation (%). Manufactured in Titanium for low mass and long life, the AT/13 has three individual sensing elements internally mounted in the three orthogonal axes; this provides excellent performance in each axis with minimal cross axis effects. Clip part number CL/01 can be ordered separately. Also available is the CL/02 which has a thicker base and can be modified to suit specific user applications. Sensitivity Deviation (%). The AT/13 is available as charge output or as IEPE voltage output. Sensitivity Deviation (%). Typical Frequency Response DJB Instruments 33 bis rue Louis Maury FR-55100 VERDUN FRANCE

AT/13 Triaxial Voltage O/P Accel. 10/100mV/g Conversion Mode Cross Axis Error % max Noise level, equiv. mg Voltage Sensitivity deviation re 20°C Max Continuous accn.g sine Saturation limit (equiv. g) Settling time to 90% final val. secs Case Material Adhesive or CL/01 or CL/02 Mounting Clip Case Seal DJB Instruments 33 bis rue Louis Maury FR-55100 VERDUN FRANCE