• CUSTOMER SERVICE • INNOVATION • MANUFACTURING • QUALITY • TECHNICAL EXPERTISE • EXCELLENCE • DESIGN • Hygienic Products Customer Service: +44 (0)1772 323529 Email: [email protected]

We are pleased to offer our customers one of the most extensive ranges for Food, Beverage, Pharmaceutical and Fine Chemical applications. • Fittings & Clamps • Custom Fabrication • Hose Assemblies The Dixon range compliments the Holedall Hygienic and Sanbrew/Sanfood Hose range enabling us to offer a complete package of Fittings and Hose assemblies. Whatever your requirement please call for the latest availability. Many items are available from stock or are made to order on very short lead times. If you have special product or delivery requirements we have extensive design and manufacturing facilities...

Materials: G-304 Stainless Steel. 3A and UK Dairy as standard. Other finishes available. 150 grit & Electropolish 180 grit 180 grit & Electropolish 240 grit 240 grit & Electropolish 340 grit Note: all non-wetted parts are in 304. Example hex nuts, clamps, pipe hangers, actuator castings. Note: Additional Improvements to the surface finish require buffing and further electropolishing. The effect is to improve the existing surface by about 50%. Ordering Information and Part Numbers. Please refer to the specific product page. Specify quantity, Size (V2” to 12 inch, equates 50 to 1200 in our part...

Product Specifications Size range: • 1" -4" OD Materials: • G = 304 stainless steel Finish: • 3A sanitary finish ID and OD Email: [email protected]

RJT BLANK CAP - 13RBN [3d PART NO. SIZE Please note: Blanks can only be used with a matching nut RJT HEX BLANK NUT WITH CHAIN -13HBN RJT DOUBLE ENDED SPANNER PART NO.

Telephone: +44 (0)1772 323529 Email: [email protected]

PLEASE CALL FOR ALL YOUR OTHER RJT REQUIREMENTS. MANY OTHER PARTS AVAILABLE.

Please note: for sizes of 2.5" and over this nut has 6 slots DIN BLANK PART NO. SIZE Please note: Blanks can only be used with a matching nut. Telephone: +44 (0)1772 323529 Email: [email protected]

DIN WELD LINER IMPERIAL DIN WELD MALE METRIC DIN WELD LINER METRIC

GASKET FOR DIN / VITON PART NO. PLEASE CALL FOR ALL YOUR OTHER DIN REQUIREMENTS. MANY OTHER PARTS AVAILABLE. Telephone: +44 (0)1772 323529 Email: [email protected]

PLEASE CALL FOR ALL YOUR OTHER IDF REQUIREMENTS. MANY OTHER PARTS AVAILABLE.

Please note: To be used with a matching nut. SMS BLANK NUT 6 SLOTS WITH CHAIN Telephone: +44 (0)1772 323529 Email: [email protected]

SMS SEAL RING L TYPE SILICONE SMS SEAL RING L TYPE EPDM SEAL TYPE SMS O-RING VITON® PLEASE CALL FOR ALL YOUR OTHER SMS REQUIREMENTS. MANY OTHER PARTS AVAILABLE. Telephone: +44 (0)1772 323529 Email: [email protected]

CLAMP - FERRULES CROSS REFERENCE TABLE BPE IMPERIAL US/BS CLAMP TYPE FERRULE SIZE (Tube O.D.) (Inch &DIN) Email: sales@d

Service ratings are based on hydrostatic tests using standard-moulded Buna-N material gaskets, with proper installation of ferrules, assembly of joints and absence of shock pressure. Contact Dixon Hygienic for service of other type and material gaskets, and for ratings at higher temperatures. All ratings shown are dependent upon related components within the systems and proper installation. For temperatures above 121 °C /250° F, we recommend using only 13MHP clamps. This information is only valid if Dixon clamps, ferrules and gaskets are used. SINGLE PIN SQUEEZE CLAMPS SINGLE PIN HEAVY DUTY CLAMP...

Hygienic Products SOLID FERRULE BLANK DISC END CAPS -

CLAMP HOSE TAIL TUBE O.D. Please note: All stems are manufactured to suit inch bore hoses (not metric hose bores). Type 1 - Standard 1" and larger Type 1 - Standard 1" and larger

Type 1 - Standard Type 1 - Standard !4"-%" 1” and larger • Colour code: one white dot, one yellow dot • 10 mesh standard. Other mesh sizes available. • Peroxide cured • Pharmaceutical class VI approved • Please contact us for compatibility information • Additional mesh sizes available, please contact us for details Please note: Mesh Screen Gaskets are also available in Silicone, Buna and Viton®. 1 0 Mesh standard.

Metal Detectable Clamp Gaskets Metal detectable gaskets are impregnated with stainless steel particles. The addition of stainless steel allows a gasket or gasket pieces to be found with metal detection equipment. ► + Type 1 - Standard Type 1 - Standard BUNA-N - METAL DETECTABLE CLAMP GASKET Features: • minimum temperature -29°C (-20 ° F) • good general use where temperature extremes do not exist FKM - METAL DETECTABLE CLAMP GASKETS Features: • minimum temp -57°C (-70° F) • resistant to steam, water and base solutions Features: • minimum temp -29°C (-20° F) • resistant to steam, heat and high...

Type 2 - Flanged 1" and larger • Refer to the technical section for compatibility information • Not recommended for use withbolted clamps BUNA-N - BLACK, FLANGED BUNA-N - WHITE, FLANGED Type 2 - Flanged 1" and larger • Refer to the technical section for compatibility information • Not recommended for use with bolted clamps Type 2 - Flanged 1" and larger • Colour code: three green dots • Peroxide cured • Passed U.S.R Class VI Cytotoxicity testing • Refer to the technical section forcompatibility information • Not recommended for use with bolted clamps

Type 2 - Flanged 1" and larger • Colour code: one white dot, one yellow dot •Meets 21CFR 177.2600 • Passed U.S.R Class VI Cytotoxicity testing • Refer to the technical section for compatibility information • Not recommended for use with bolted clamps Type 2 - Flanged 1" and larger ► Colour code: pink dot ► Peroxide cured •Meets 21CFR 177.2600 • Passed U.S.R Class VI Cytotoxicity testing • Refer to the technical section for compatibility information • Not recommended for use with bolted clamps SILICONE - WHITE, FLANGED Type 2 - Flanged 1" and larger • Platinum cured • Passed U.S.R Class VI Cytotoxicity...