Product Category Fuel Distribution Products dixoneurope.co.uk Customer Service +44 (0)1772 323529

• Used in the transfer of liquids and dry bulk in refineries, chemical plants, rail terminals, truck terminals, tote and drum filling and food industry • 2", 3", 4" and more upon request • Various materials available including: hardened carbon steel, 316L stainless steel and aluminum • Seals: Buna, EPDM, FKM A and B, PTFE, Baylast and more on request • Steel counterbalance housing • Three options for sealing swivels: O-ring, V-ring and Split Flange ■ Engineered with easy service in mind ■ Wide variety of end configurations available Torsion Spring Counterbalance • Ball screw adjustment mechanism...

API Fittings Couplers are completely modular so they can be built with various face seal combinations to be compatible with different alternative fuels, performance levels and applications • Suitable for rail car and tank truck loading or unloading • Locking five-cam design provides easy alignment and tight connection • Replaceable nose seal can be changed without removing coupler from loading arm • Nose seal design tested to 450 PSI without seal ejection • Fully interlocked collar prevents fitting from opening when disconnected and from being disconnected while opened • 4" TTMA inlet mounting...

Rack MonitorApplication • Installed on the gantry to control the loading process of petroleum fuels or other hazardous liquid into cargo tanks • Automatically detects and switches between 2-wire or 5-wire type sensor operation • Compatible with analog 2-wire thermistor type sensors • Redundant relay outputs prevent single point failures • Data management via RS485 port • Wireless bypass key system • Ground verification • Reads trailer identification modules • Suitable for Class I, Division 1, Group CD and Class I, Zone 1, Group IIB • Safety Break-Away couplings are designed to minimize spillage...

• Overfill detection sensors are intended to detect a pending overfill condition inside the fuel tank compartment. • Manufactured in accordance with EN13922 • Unique prism sealing design prevents product and vapour entering the electronics and causing probe failure • Probes are available in 7", 12" & 18" lengths. Custom lengths available • ATEX Approved • Fully compatible with installed industry standard rack monitors • Option: Pre-wired and factory tested with Plug-n-Play cabling and plugs • Sockets allow for the transfer of the electronic signal from the terminal control monitor to the tanker....

The oil and gas industry is broken down into three key sectors: upstream, midstream, and downstream. Exploration and production, collection and transportation, and refining and purification all come with unique challenges. Dixon manufactures and supplies a wide range of fluid transfer solutions including API certified products, zero emission valves, no-spill couplings, and safety breakaway fittings. Low Pressure System Products Frac Fittings King Crimp System Hammer Unions Control Valves Permanently Swaged Couplings Tank Truck / Railcar Fittings Hose Assemblies Dry Break Couplings Cam & Groove...