Outside Air Applications
52Pages

Compressor 125 CFM 2 Dixon Valve & Coupling Company, 800-355-1991

Compressor 600 CFM Dixon Valve & Coupling Company, 800-355-1991 3

Detail view of manifold assembly 4 Dixon Valve & Coupling Company, 800-355-1991

Safety • Use Dixon couplings, retention devices and accessory products only for their intended service. • All recommendations of the Hose Manufacturer, and the Coupling Manufacturer, must be employed with regards to Size, Temperature, Application, Media, and Pressure when selecting the components for a hose assembly. • All finished hose assemblies should be tested in accordance with the Rubber Manufacturers Association recommendations. • All hose assemblies should be thoroughly inspected prior to each use to insure they are undamaged, and properly coupled. • Use safety clips on couplings,...

Air-King Universal Couplings Dixon Air King couplings are recommended for use on virtually any type of pneumatic equipment. Service: • The maximum recommended working pressure for Dixon Air King is 150 PSI at ambient temperature (70°F). Features: • A universal head that is identical for all parts in the 1/4" to 1" range. With this head, any fittings within that range can be connected regardless of hose shank or thread size. • Couplings with optional ferrules permanently attached are provided ready install. • Safety - There are three safety features built into every Dixon Air King: 1. Washer...

Hose Ends • • • • Shanks are long and deeply corrugated Available in malleable iron, brass or 316 stainless steel Available in sizes 3/8" to 1" 5/8" not available in stainless steel Size 3/8" 1/2" 5/8" 3/4" 1" B Malleable Iron pkg Part # qty AMH 25 AM1 50 AM5 50 AM6 50 AM11 50 Brass pkg qty 25 50 50 50 50 Part # ABH AB1 AB5 AB6 AB11 316 Stainless Steel Part # RAMH RAM1 ----RAM6 RAM11 C Dimensions Size A B C D 3/8" 1/2" 5/8" 3/4" 1" D A 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 3-1/2" 3-13/16" 4-1/4" 4-3/16" 4-25/32" 1-11/16" 1-5/8" 2-7/16" 2-1/8" 2-13/16" 7/16" 17/32" 11/16" 25/32" 1-1/16" Refer...

AIR KING Blank Ends • Blank End fittings have no outlet and are used to block the line at any coupling point. • The end opposite the coupling head is flat, with an eye for a chain to secure the fitting when not in use. • Available in malleable iron, brass and 316 stainless steel. Malleable Iron pkg Part # qty AM0 25 316 Stainless Steel Part # Brass Part # AB0 2-1/2" pkg qty 25 2-1/2" RAM0 5/16" Triple Connections 5/16" • Triple connection consists of three universal couplings that provide an extra outlet when connected to the line. • Available in malleable iron or brass. 120° 3-3/4"...

Air King with Ferrules • • • • Couples with other Air King fittings. Rated to 150 PSI working pressure. Ferrules are available on malleable iron and stainless steel. Carbon steel ferrules that can be crimped or swaged. Part # O.D. Range Size 1/2" 3/4" 1" 1" B From: To: 27/32" 1-1/16" 1-18/64" 1-30/64" 1-1/32" 1-11/32" 1-34/64" 1-46/64" Stainless Steel ----RAM6WF --------- Malleable Iron AM1WF AM6WF AM11WF-1 AM11WF Dimensions A Size A B 1/2" 3/4" 1" 2-1/2" 2-1/2" 2-1/2" 3-7/16" 4-3/16" 4-25/32" Refer to Installation and Inspection Procedure # 2306 on page 51. 4-Lug Quick Acting Couplings •...

Boss Coupling System Boss Couplings supply a convenient threaded fitting to connect two lengths of hose, or a single length to a male or female threaded (NPT) outlet. Service: Boss Couplings are all-purpose hose couplings, universally recommended for steam hose connections. They are also widely used for air, water, fluid petroleum, chemicals and liquid petroleum gas up to 1" ID. Boss Couplings can be applied to many types of rubber, synthetic, plastic, metallic or semi-metallic hose. Consult the factory for specific media capabilities. Features: The spud part of the coupling serves as one...

BOSS FITTINGS Ground Joint Positive Metal-to-Polymer Seal • A leakproof seal is formed when the metal head of the stem makes contact with the patented polymer seat in the spud. • The non-metallic polymer seat resists most chemicals found in manufacturing facilities. • Recommended for steam service up to 450°F. • Easy to seal. • Works with existing Ground Joint fittings. • Use with Boss clamps found on pages 18 and 19. Refer to Installation and Inspection Procedure #'s 1000, 2000, 2001 and 3001 on pages 50 and 51. Plated Steel and/or Malleable Iron Wing Nut Thread Wing Nut Thread N.P.T N.P.T...

Washer Type • A Klinger washer is inserted between the stem and spud. • A leakproof seal is formed by rotating the wing nut and hammering it tight. Refer to Installation and Inspection Procedure #'s 1000, 2000, 2001 and 3001 on pages 50 and 51. Plated Steel and/or Malleable Iron Wing Nut Thread Wing Nut Thread Coupling with Female Spud Hose Part # x NPT 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" WF3 WF6 WF26 WF36 WF51 WF61 WF81** WF96 WF111 Wing Nut Thread N.P.T N.P.T Stem Wing Nut Female Spud Male Spud Double Spud Washer * Part # Part # Part # Part # Part # Part # SS337 B1 B6 B11 B16 B21...

Holedall Fittings • Designed for air or liquid applications where a permanent, low profile clamping system is desired. • Fittings are supplied with carbon steel ferrules. • Consult the factory for swage and/or crimp specifications. • Not For Steam Services. O.D. Range Size ¾" 1" 1½" 2" 3" WING NUT From: To: 1-10/64" 1-15/64" 1-19/64" 1-30/64" 1-35/64" 1-39/64" 1-15/16" 2-1/64" 2-9/64" 2-9/16" 2-41/64" 2-49/64" 3-9/16" 3-41/64" 3-49/64" 1-14/64" 1-18/64" 1-22/64" 1-34/64" 1-38/64" 1-42/64" 2" 2-1/8" 2-1/4" 2-5/8" 2-3/4" 2-7/8" 3-5/8" 3-3/4" 3-7/8" Part # Malleable Stainless Iron Steel GF26P1...