Dry Disconnect Brochure
20Pages

DRY DISCONNECTS Dry Disconnects Dry Disconnects Dixon Valve & Coupling Co., Call 877-963-4966 1

Features and Benefits When your product is: • Expensive • Expensive to clean up • Expensive to reprocess or dispose • Hazardous to workers or the environment • Prone to accidental spillage and product loss DDC300SS Dry disconnect couplings are designed for quick and spill free connection and disconnection of hoses and pipelines. They are used by producers of ink, adhesives, fatty acids, pharmaceuticals, liquid soaps, petroleum, chemicals, agricultural and a wide variety of common caustic and specialty acids. • Easy to handle push and turn - free flow, turn and pull - closed • Time saving no...

DRY DISCONNECTS Dry Quick Disconnect Couplers (Hose Unit) • Coupler has built-in swivel • Stainless steel ball bearings • Shaft journal in stainless steel embedded in PTFE (Teflon®) to eliminate seizure • Riveted piston pin to minimize the risk for failure under extreme pressure conditions • Electrically conductive, weather resistant protective ring • All wetted parts are stainless steel • Rollers for the stainless steel units are hastelloy C276 on the stainless steel shaft • Rollers for the aluminum and brass units are aluminum-bronze on the stainless steel shaft • Plugs in composite...

Dry Quick Disconnect Adapters (Tank Unit) • • • • The adapter is usually installed on the tank or manifold Available in female NPT or 150# ASA, TTMA or DIN flange Conical valve seat to eliminate the risk for "piston blow out" PTFE (Teflon®) bearing between the piston shaft and the piston guide eliminates the risk for seizure • Caps in composite (Polyeten PE-HD 300) provide very good protection against corrosion, and withstand both hot and cold environments Construction: • Aluminum adapter aluminum poppet, stainless steel internal parts • Stainless steel adapter stainless steel poppet,...

DRY DISCONNECTS Dry Gas Couplings Dry gas couplings are designed for safe loading and discharge of bobtails or intermediate bulk delivery trucks. They are quick and easy to connect and can be connected to a tank unit with pressures up to 360 PSI. If the pressure is higher you can equip the couplings with a pressure relief valve. The easy to connect pressure relief valve dissipates trapped fluid pressure into the hose coupler without spillage. The primary application of dry gas couplings is in the handling of LPG - Propane and Butane. • • • • • • • • Safe handling of LPG Easy to use and...

Dry Aviation Couplings Dry aviation couplings are designed for use in aviation and military refueling systems. Manufactured to accept the international standard 2½" point bayonet, hose end refueling nozzles according to: ISO45 / MS24484 / STANAG 3105 / British Aerospace Spec. 2C14. They are not configured for under-wing refueling. Technical Information: • Body: high strength aluminum • 150 PSI working pressure • Coupling ring: gunmetal • Caps and plugs in composite (Polyeten PE-HD 300) • Bayonet flange and inner parts: stainless steel, aluminum provide a very good protection against...

DRY DISCONNECTS Cam and Groove Style Dry Disconnect Couplings Compatible with most cam and groove style dry disconnects. The Bayco dry disconnect helps prevent spillage from normal or accidental disconnects. It has a spring loaded sealing device designed to "snap" closed should the valve become disconnected with the poppet open, significantly limiting liquid loss. Our dry disconnect couplings are available in a wide range of sizes, metals, and seal materials. Contact the factory at 800-3551991 for chemical compatibility, size, and material selection. Special configurations can be designed...

Cam and Groove Style Dry Disconnect Couplers • • • • • • • • • • Dixon EZ Boss-Lock cam arms provide high security from accidental opening due to vibration or snagging Heavy duty stainless steel crank and link provide long service life Dry disconnect coupler has automatic closing poppet assembly Stainless steel handle allows product exposure to corrosive chemicals or washdown service Strong handle attachment prevents bending of crank assembly Fully interchangeable with Kamvalok (OPW trademark) style fittings Aluminum fittings have stainless steel internals For pressure ratings at other...

DRY DISCONNECTS Bayonet Style Dry Disconnects Bayonet dry disconnect fittings are guaranteed to be compatible with existing models. These fittings are designed and tested to provide maximum performance. • Available in stainless steel, black anodized aluminum, and brass • Smooth coupling action and swivel rotation • Interchangeable with Emco™ Wheaton 72 and 73 Series BA62-300 BA31-300 BA32-200 Stainless Steel Adapters Dixon Part # BA31-200 BA32-200 BA31-300 BA32-300 BA61-300 BA62-300 Size 2" 2" 3" 3" 3" 3" BS62-200 Emco™ Part # J72A-BBN0-B / J72A-ABN0-B J72A-BVN0-B / J72A-AVN0-B J73A-BBN0-B...

Repair Parts for Mann Tek Adapters and Couplers ADAPTERS Part # Description 56ARKAL 70ARKAL 105ARKAL 119ARKAL 164ARKAL 238ARKAL Aluminum repair kit for ¾" - 1" adapter 56mm (DDA075AL & DDA100AL) Aluminum repair kit for 1½"- 2" adapter 70mm (DDA150AL & DDA200AL) Aluminum repair kit for 3" adapter 105mm (DDA300AL105) Aluminum repair kit for 3" adapter 119mm (DDA300AL) Aluminum repair kit for 4" adapter 164mm (DDA400AL) Aluminum repair kit for 6" adapter 238mm (DDA600AL) 56ARKBR 70ARKBR 105ARKBR 119ARKBR 164ARKBR Brass repair kit for ¾" - 1" adapter 56mm (DDA075BR & DDA100BR) Brass repair kit...

DRY DISCONNECTS O-Ring Kits for Mann Tek Adapters Part # Description 56AORKVI 70AORKVI 105AORKVI 119AORKVI 164AORKVI 238AORKVI Viton® O-ring kit for ¾" - 1" adapter 56mm (DDA075 & DDA100 AL,BR,SS) Viton® O-ring kit for 1½" - 2" adapter 70mm (DDA150 & DDA200 AL,BR,SS) Viton® O-ring kit for 3" adapter 105mm (DDA300105 AL,BR,SS) Viton® O-ring kit for 3" adapter 119mm (DDA300 AL,BR,SS) Viton® O-ring kit for 4" adapter 164mm (DDA400 AL,BR,SS) Viton® O-ring kit for 6" adapter 238mm (DDA600 AL, SS) 56AORKNI 70AORKNI 105AORKNI 119AORKNI 164AORKNI 238AORKNI Nitril® O-ring kit for ¾" - 1" adapter...