Catalog excerpts
SERVICE - Dixon "Air King" couplings are recommended for use on air lines for virtually any type of pneumatic equipment. The maximum recommended working pressure for Dixon "Air King" universal couplings is 150 PSI or less at ambient temperature (70° F). FEATURES - Dixon "Air King" fittings have a universal head which is identical for all parts (hose ends, male NPT and female NPT) within the 1/4" to 1" range. This enables any two fittings (within that range) to be directly connected regardless of hose shank or threaded size. Dixon "Air King" couplings with interlocking ferrule also have the...
Open the catalog to page 2Blank Ends • Blank end fittings have no outlet and are used to block the line at any coupling point. • The end opposite the coupling head is flat, with an eye for a chain to secure the fitting when not in use. • Available in malleable iron, brass and 316 stainless steel. 2-1/2" Malleable Iron pkg Part # qty 2-1/2" AM0 316 Stainless Steel Brass Part # Part # AB0 25 pkg qty 25 RAM0 5/16" All dimensions are nominal. Triple Connections 5/16" 120° 3-3/4" • Triple connection consists of three universal coupling heads in a "Y" form that provides an extra outlet when connected to the line. •...
Open the catalog to page 4"AIR KING" Safety Pins, Clips, Lanyards and Washers The use of an "Air King" Safety Clip or wire type retainer is necessary to assure "Air King" Universal Couplings will not become accidentally disconnected. This guarantees the fittings are properly connected as the pin will not go through holes in mating flanges until the couplings are locked in place. Only one "Air King" Safety Clip or wire type retainer is required for each "Air King" Universal Coupling. "AIR KING" Safety Pins • Heavy duty. • Oversized. • Sold only in bags of 25. Wire Diameter Part # .058 .091 AKSP1 AKSP25 Standard...
Open the catalog to page 6“AIR KING” 4-Lug Quick Acting Couplings Malleable Iron Rubber Washer for 4-lug Brass Part # Size Part # Part # pkg qty AWR14 1-1/4" 1-1/2" 2" 1-1/4" 1-1/2" 2" AM16 AM21 AM26 AM18 AM23 AM28 AB16 AB21 AB26 AB18 AB23 AB28 25 25 10 25 25 20 Fits all sizes Hose Ends Rated to 150 PSI Female N.P.T. Ends Not to be used for steam service. NOTE: Safety clips are same size for both 2-lug and 4-lug Universal Couplings. See page 6. Use safety clips on all Universal Coupling applications. Optional package quantity shown "BOSS" Clamps Hose I.D. Size 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2"...
Open the catalog to page 7In-Line Lubricators Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms. Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor. Installation is recommended within 25 feet of the tool to be lubricated. Refer to the arrow for proper air flow direction. Transparent sight disc allows visual inspection of oil level. Oil flow is regulated by screwdriver screw adjustment. Not recommended for constant flow applications. Minimum flow rate is 30 SCFM. NPT Size 1/2" 3/4" 3/4" 1" Oil Capacity Maximum...
Open the catalog to page 8ASME Air Receiver Manifold Compressor Air Receiver: • Built to ASME Code, National Board registered • 7 gallon capacity • 200 PSI working pressure • All openings are female NPT thread • Safety yellow painted 40" 3/4" 23-1/4" 3 2" 1/2" 2 1 1" 10-1/2" 1" 1" Three 1" holes located 180° of this side 1/2" 4, 5, 6 7 9, 10, 11 1" 8 12" 17" Dixon 1217AR-4AK Air Receiver Manifold Assembly with "Air King" Outlet Ports includes the following: Part # / locations 1217AR-4 1217 Frame location 1 location 2 location 3 locations 4, 5, 6, 7, 9, 10, 11 location 8 1217AR-4AK Description 7 gallon ASME...
Open the catalog to page 10"KING" Safety Cables When hose, couplings or clamps fail, or there is an accidental separation of the assembly, King Safety Cables minimize damage to equipment and injuries to operators. KING SAFETY CABLE reaches across the hose fittings to provide standby safety for hose. Spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose. Thoroughly tested with years of service. A positive safeguard for air hose connections - helps you meet today's safety standards. KING SAFETY CABLE must be installed in the extended position (no slack). Features: •...
Open the catalog to page 11Through its divisions and affiliated companies, Dixon is recognized as the premier manufacturer and supplier of hose fittings and accessories spanning a wide range of industrial uses. Dixon’s reach includes products for food, dairy processing, beverage and brewery, mobile tankers, mining, construction, chemical processing, petroleum, oilfields, refining, nuclear and manufacturing. Dixon Valve & Coupling Company 800 High Street, Chestertown, MD 21620 Customer Service: 800.355.1991 Fax: 800.283.4966 www.dixonvalve.com © 2004 DVCC Printed in the USA AK0404-1P5M
Open the catalog to page 12All DIXON EUROPE catalogs and technical brochures
-
Quick Release Products 2024
4 Pages
-
Hygienic Products Overview
4 Pages
-
Quick Coupling Overview
6 Pages
-
Hose Overview
4 Pages
-
Dixon Quick Coupling Catalogue
76 Pages
-
Rotary Coupling
4 Pages
-
Polypropylene Valves
1 Pages
-
Locking Handle Ball Valves
1 Pages
-
Steam Ball Valves
1 Pages
-
Safety Vented Ball Valves
1 Pages
-
Hygienic Products Catalogue
124 Pages
-
Hose & Coupling Directory
524 Pages
-
Pneumatic Tubing Fittings
12 Pages
-
Valves
20 Pages
-
Outside Air Applications
52 Pages
-
Non-Metallic Fittings
2 Pages
-
In-Line Lubricators
2 Pages
-
Holedall Petroleum
8 Pages
-
Holedall Crimp System
2 Pages
-
Gauges & Thermometers
2 Pages
-
FRL, Wilkerson
40 Pages
-
FRL, Norgren
36 Pages
-
Flomax Connectors
10 Pages
-
Dry Disconnect Brochure
20 Pages
-
Dix-Lock
8 Pages
-
Coupling Equipment
2 Pages
-
Cam & Groove - Global
8 Pages
-
Cam & Groove
2 Pages
-
Band Clamps
24 Pages
Archived catalogs
-
Dry Break Check Valve
1 Pages
-
VEP Series Quick Coupling
4 Pages
-
Worm Gear Clamps
4 Pages