DOWN DRAFT The Diversi-Tech Wet Downdraft Table is a self-contained workstation with its own water dust collection system. The unit can be used to safely collect combustible dust like: Aluminum, Magnesium, Niobium, Tantalum, Titanium and Zirconium. The wet downdraft table complies with both OSHA and NFPA regulations. COMPLIES WITH NFPA 484 GRINDING • SANDING . DEBURRING . CUTTING - Efficient operation on a wide range of materials and particle sizes. - Filtered air is returned to the building without the need for costly fire suppression equipment. - Heavy duty construction - Powder coated mild steel downdraft table - Stainless steel wet dust collector - Easy installation and ready to run. - Multiple side-to-side and back-to-back configurations - Angled side and back walls / Light kit - Stainless steel downdraft table - HEPA afterfilter (99.97% @ 0.3 microns) - Side mounted capture arm / Backdraft hood - Electronic water level control and auto-fill - Powered sump fan for magnesium applications (Complies with NFPA/OSHA)

Dust-laden air is drawn in through the table surface and into the wet dust collector's inlet. The wet dust collector cleans the air by the combined action of centrifugal force and a thorough intermixing of water and dust laden air. The dust is separated from the air by water droplets created by the flow of air through strategically placed baffle plates. Once wet, the dust becomes permanently trapped and falls down into a reservoir. A small amount of fresh water is supplied through the make-up of water feed, to compenstate for evaporation. mMcrial dcnul) »