SOLDER VACCompact Air Cleaning System Protect yourself from toxic soldering fumes wherever your job takes you. The Solder-Vac fume extractor is perfect for removing fumes from light to medium-duty soldering applications and many other industrial and laboratory applications. The flexible system can be set in a vertical or horizontal position, on a bench-top or on the floor. Features: • No internal supports or articulated bends, which restrict airflow • High Level of Filtration in a Compact Design • Blower Motor rated at 100,000 Hour Continuous Duty Hours • Powder Coat Paint Finish Inside and Out • Can be mounted Horizontally or vertically • Includes Fan Speed Controller Benefits: • Compact, portable, 120 volt, single phase • Capture-at-source for cleaner air • Complies with OSHA guidelines for controlling weld fumes Ideal Applications: • Soldering • Heat Bending • Dental Grinding • Light Welding, Sanding & Grinding • Solvents • Mixing Powders and Chemicals • Wire Stripping • Jewelry Buffing • Many other light to moderate industrial and laboratory activities SOLDERING • CHEMICAL VAPORS • BRAZING • LASER FUMES

DIVERSITECH air pollution solutions Filter Options The Solder Vac™ systems come standard with a primary 6” deep rigid cell filter, caster base, exhaust deflector, 2-ply, polyester ring panel prefilter and a filter hold-down grid. Choose filter O-987-0001, O-987-0002A, or O-987-0002B for most grinding or sanding, dust from mixing chemical powders, and smoke from chemicals, light welding, or similar applications. For soldering fumes, and other applications that contain lead or other potentially hazardous fumes, choose filter O-987-0003, O-987-0004A, or O-987-0004B. For solvent fumes, touch-up painting,...