Product description The type 2350 Temperature Sensor has a one piece injection molded PVDF body that is ideal for use in high purity applications. It also outlasts metal sensors in aggressive liquids and eliminates the need for costly custom thermowells. These sensors are available with a proprietary digital (S3L) output or field-scaleable 4 to 20 mA output. Dual threaded ends (% in. NPT) allow submersion in process vessels, or in-line installation with conduit connection. An integral adapter kit (sold separately) may be used to create a compact assembly with field mount versions of the type 9900 Transmitter. • Standard % in. NPT process connection • One-piece injection molded PVDF body • Ptl000 platinum RTD in extended tip for quick response • Easy installation • Threaded for in-line or submersible installation • Plating Bath Temperature Control • Heat Exchange Monitor • Hot/Cold Mixing System Monitor • Data Acquisition • Cooling Loops • Effluent Monitoring • Chemical Processing GF Piping Systems - Industrial Piping Systems (06/20

Output Digital (S3L) output or 4 to 20 mA Response Time 10 seconds Sensing-End Connection % in. NPT male thread Cable-End Connection % in. NPT male thread Wetted Materials Sensor Housing PVDF Power Requirements Cable Length 4.6 m (15 ft) cable length can also be extended up to 121 m Reverse polarity and short circuit protected. Span 4 to 20 mA factory calibrated 0 °C to 100 °C (32 °F to 212 °F) Operating Temperature Relative Humidity 0 to 95% non-condensing Shipping Weight RoHS compliant, China RoHS GF Piping Systems - industrial Piping Systems (06/20

Dimensions Temperature instrument (sold separately) 197 mm (7.75 in.) Mounting Kit (sold separately) System Overview In-Line Installation Panel Mount GF Instruments - 9900 - 9950 GF Instruments* - 9900-1P with Rear Enclosure - 9900-1 with 3-8050 Universal Mount Kit* Automation System - 0486 Profibus Concentrator and Customer Supplied Programmable Logic Controller or - Programmable Automation Controller Signet 3-0486 Profibus Concentrator - Customer Supplied Chart Recorder, Programmable Logic Controller or - Programmable Automation Controller GF Instruments with 3-8052 Integral Mount Kit - 9900...

Pressure-temperature diagram Note The pressure-temperature diagrams are specifically for the GF sensor. During system design the specifications of all components must be considered. In the case of a metal piping system, a plastic sensor will reduce the system specification. When using a PVDF sensor in a PVC piping system, the fitting will reduce the system specification. In-line Mounting Submersible Mounting Application Tips • For submersible sensor mounting, always use a water tight conduit and a cable gland to prevent moisture intrusion. • To extend the cable, use a 3-conductor shielded cable...