- Catalogs
- Distromel, S.A.
- Weighing systen in rare-side lifter waste truck
Weighing systen in rare-side lifter waste truck
Weighing systen in rare-side lifter waste truck
The Smart Touch Panel-RSU is an automatic weighing system designed for rear or side load lifts in Urban Solid Waste vehicles. It utilizes load cells in the lift arm and may include RFID and GPS systems to optimize waste collection management by saving resources and time.
Functional Specifications
- Geopositioning, weighing, and identification of containers via RFID.
- Automatic start-up of the system.
- Weighing procedure involves calculating the gross weight during lifting and reweighing after emptying to determine waste weight.
- Real-time data transmission via wireless communication, with data storage during coverage loss.
- Data is displayed in siGEUS software and a mobile application for Urban Services Management.
Technical Specifications of Components
- Load Cells: Operate on 12-24 V DC with a margin of 7-36 V DC, Class III (OIML-R60), IP-67, sensitivity of 2 mv/V, and a maximum electronic load limit of 1000 kg.
- Inclinometer: Uses CAN Bus for communication, operates on 12-24 V DC with a margin of 7-36 V DC.
- Analogue-Digital Converter: Similar voltage requirements and communication protocol as the inclinometer.
- iNET-Touch Panel: Serves as the on-board computer.
- Identification Electronics: Automatic tuning, reads FDX-B and HDX tags, operates on 12-35 V DC, uses CAN Bus.
- External Siren: Provides an acoustic alarm when a container is lifted.
Options
- Printer for documentation.
- Container lifting detector.
- External keypad for data entry.
- GPS navigation system for enhanced tracking.
Catalog excerpts
WEIGHING + RFID + GPS system for rear/side loading vehicles DISTROMEL has designed the Smart Touch Panel-RSU, a weighing, identification and incidence location and management system for Easy type bilateral loading vehicles (Urban Solid Waste), based on load cells in the vehicle's lifting arm and designed specifically and exclusively for incorporation in every lifting arm on the market. This system incorporates our iNET- Touch Panel as the onboard computer, featuring cutting-edge CAN bus technology.
Open the catalog to page 1
Smart Touch Panel-RSU 1. Objetive Automatic weighing system for rear or side load lifts (RSU), based on load cells in the lift itself. It may also include a radiofrequency identification system and GPS tracking system. 2. Functional specifications » Geopositioning and/or weighing and/or identification of each container by RFID. » Automatic start-up. » Weighing procedure: the weight of the container (gross weight) is calculated in the lifting operation. When the container has been emptied and descends, it is reweighed to obtain the tare. The difference between the two weights provides the weight...
Open the catalog to page 2All Distromel, S.A. catalogs and technical brochures
Weighing System in Forklift2 Pages
General6 Pages
Logistics Area2 Pages
Weighing system in crane2 Pages
GPS location system2 Pages
