- Catalogs
- Distromel, S.A.
- Weighing system in two-sides waste truck
Weighing system in two-sides waste truck
Weighing system in two-sides waste truck
The Smart Touch Panel-RSU is designed for automatic weighing in Easy type rear or side loading vehicles for Urban Solid Waste (RSU). It utilizes load cells in the vehicle's lift arm and may include RFID and GPS systems to optimize waste collection management.
Functional Specifications
- Geopositioning, weighing, and identification of containers via RFID.
- Automatic system start-up.
- Weighing process involves calculating gross weight during lifting and tare weight after emptying to determine waste weight.
- Real-time data transmission via wireless communication, with data storage during coverage loss.
- Data is displayed in siGEUS software and Urban Services Management mobile app.
Technical Specifications of Components
- Load Cells: Operate on 12-24 V DC, Class III (OIML-R60), IP-67, sensitivity of 2 mv/V, with a maximum service load of 120% and breaking load of 300%.
- Analogue-Digital Converter: Operates on 12-24 V DC, communicates via CAN Bus with iNET-Touch Panel.
- iNET-Touch Panel: Serves as the on-board computer.
- Identification Electronics: Automatic tuning, reads FDX-B and HDX tags, operates on 12-35 V DC, communicates via CAN Bus.
- External Siren: Provides an acoustic alarm when a container is lifted.
Options
- Printer.
- Container lifting detector.
- External keypad for data entry.
- GPS navigation system.
Catalog excerpts
Smart Touch Panel-RSU WEIGHING + RFID + GPS system for bilateral collection vehicles (Easy) DISTROMEL has designed the Smart Touch Panel-RSU, a weighing, identification and incidence location and management system for Easy type bilateral loading vehicles (Urban Solid Waste), based on load cells in the vehicle’s lifting arm. This system incorporates our iNET- Touch Panel as the onboard computer, featuring cutting-edge CAN bus technology.
Open the catalog to page 1
Smart Touch Panel-RSU 1. Objetive Automatic weighing system for Easy type rear or side (RSU) load lift, based on load cells in the lift itself. It may also include a radiofrequency identification system and GPS tracking system. 2. Functional specifications » Geopositioning and/or weighing and/or identification of each container by RFID. » Automatic start-up. » Weighing procedure: The weight of the container (gross weight) is calculated in the lifting operation. When the container has been emptied and descends, it is reweighed to obtain the tare. The difference between the two weights provides...
Open the catalog to page 2All Distromel, S.A. catalogs and technical brochures
Weighing System in Forklift2 Pages
General6 Pages
Logistics Area2 Pages
Weighing system in crane2 Pages
GPS location system2 Pages
