Catalogs >
Distribuciones Julmarsa S.L. >
TAPES FOR SMART CARD MARKET

TAPES FOR SMART CARD MARKET
2Pages

Catalog excerpts

Our expertise is your success For the Smart Card & Identification Industry With this range, we offer consumers an approved choice of adhesive solutions of heat-activated films for various applications for the Smart Card & Identification Industry. Our products provide extremely high bond strengths and excellent plasticizer resistance. In addition, they adhere well to a wide variety of surfaces while keeping high conformability and softness to ensure flexibility of the assembled devices 160 & 161 are specifically designed for plastic card and passport lamination. Typical applications for 160 & 161 include: • Layer lamination of dissimilar materials like plastic and paper used to make the cover of passports • Layer lamination for dual, contactless and multifunctional cards • Plastic material assembly key features and benefits 160 NEW • Is a heat reactive adhesive transfer thermoplastic polyurethane film • Is a 20pm thick clear PU resin • Supplied on a 130 g/m2 white Kraft paper release liner • Exhibits extremely high bond performance on PVC, ABS, PC, TESLIN, paper, PET-G, polyimide, etc. and fair adhesion on PET-F and metals • Provides soft and flexible bonding due to its chemical and unique formulation • Low bonding temperature (+7013) allows use on temperature sensitive substrates • Scentless when activated 161 NEW • Has same construction and performance than G160 but with a 27pm thick white pigmented PU resin • Specifically used to hide electronic devices or other components thanks to the high opacity of its white adhesive mass

Open the catalog to page 1

Application to primary substrate: Unwind 160 or 161 product and combine the adhesive side to the surface of the substrate that will be laminated. This should be done by using a heated squeeze roll or other heated method which ensures firm pressure and intimate contact of the adhesive film and the substrate. Minimum temperature of 80*0 during few seconds is recommended for lamination. Application to secondary substrate: Peel off the protective release liner and apply the adhesive side to the desired surface using heat and pressure. Layer lamination for dual card Peel strength and holding...

Open the catalog to page 2

TAPES FOR SMART CARD MARKET 2Pages

Catalog excerpts

All Distribuciones Julmarsa S.L. catalogs and technical brochures

TAPES FOR SMART CARD MARKET
2Pages