DESCRIPTION high performance double-sided foam bonding tape. The product is white. The Polyethylene foam is predominantly closed celled. An acrylic pressure sensitive adhesive is coated on both sides, and the product has a paper release liner. The material can be supplied with a film liner facilitating automated application. APPLICATIONS • For mirror mounting. • For mounting glazing bars. • For mounting cable trunking. • For crystalline silicon PV panel frame bonding. • For general mounting / bonding. PRODUCT BENEFITS • Maximum recommended weight loading of 15g/cm2. • Service temperature: -40°C to +100°C. • Application temperature: +10°C to +40°C. • Shelf life of 1 year from date of dispatch. • Minimum 20% compression required to effect a water seal. • Coated on both sides with a high quality pressure sensitive acrylic adhesive. • Good resistance to dilute acids and alkalis. • Paper release liner, reducing dimensional change during application. • Very good ultraviolet {UV} light resistance. • Resistance to abrasion, corrosion and moisture. • Suitable for indoor and outdoor environments. • No known hazards associated with this product. • May be used with Perspex and Polycarbonate. • Pre-determined dimensional sealant reduces waste. • Clean to use. Accreditation: Conforms to European Directive 2000/53 EC (lead, chromium VI, mercury, cadmium free) LGA Quality Certificate No. LI 60116108 001 - German Furniture Institute - mirror bonding IEC 61215:2005 approved - Photovoltaic (PV) panel frame bonding TECHNICAL PROPERTIES