LOW OUTGASSING SHIELDING TAPE

Product catalog summary

Description: The 648 low outgassing shielding tape is constructed from a thin aluminum foil and polyester film laminate, coated with a low outgassing acrylic adhesive on the polyester side. It is supplied on a silicone paper interliner.

Application: This tape is used for EMI/RFI shielding purposes.

Construction:

Substrate: The aluminum foil thickness is 0.012mm (0.5 mil) and the polyester film thickness is 0.019mm (0.75 mil), resulting in a total substrate thickness of 0.033mm (1.3 mil).
Total Thickness: The overall thickness of the tape is 0.063mm (2.5 mil).
Adhesive: The tape uses a low outgassing acrylic adhesive.
Tensile Strength: The tensile strength is 30 N/cm (18 N/cm).
Elongation: The elongation range is 30-70%.
Adhesive Strength: The adhesive strength is 3.0 N/cm (27 oz/inch).
Interliner: The tape includes a release coated paper interliner.

Standards: The tape adheres to EN 60454 and ASTM D-1000 standards.

Contact Information: Distribuciones Julmarsa S.L., Phone: 917254255, Website: www.julmarsa.com, Email: [email protected]

Catalog excerpts

Distribuciones JULAAARSA CINTAS ADHESIVAS ESPECIALES DESCRIPTION: 648 IS BASED ON A THIN ALUMINIUM FOIL AND POLYESTER FILM LAMINATE COATED WITH A LOW OUTGASSING ACRYLIC ADHESIVE ON THE POLYESTER SIDE. 648 IS SUPPLIED ON A SILICONE PAPER INTERLINER. APPLICATION: EMI/RFI SHIELDING TAPE CONSTRUCTION: ALUMINUM FOIL POLYESTER FILM RELEASE PAPER INTERLINER PHYSICAL PROPERTIES: SUBSTRATE: ALUMINIUM FOIL THICKNESS: POLYESTER FILM THICKNESS: SUBSTRATE THICKNESS: TOTAL THICKNESS: ADHESIVE: TENSILE STRENGTH: ELONGATION: ADHESIVE STRENGTH: INTERLINER: EN VALUE: ASTM VALUE: 0.012MM 0.019MM 0.033MM 0.063MM LOW OUT-GASSING ACRYLIC ADHESIVE 30 N/CM 18 N/CM RELEASE COATED PAPER Distribuciones Julmarsa S.L www.julmarsa.com [email protected]

Open the catalog to page 1

LOW OUTGASSING SHIELDING TAPE

LOW OUTGASSING SHIELDING TAPE

Catalog excerpts

All Distribuciones Julmarsa S.L. catalogs and technical brochures