1. Catalogs
  2. Distribuciones Julmarsa S.L.
  3. GLASS CLOTH ADHESIVE TAPE

GLASS CLOTH ADHESIVE TAPE

GLASS CLOTH ADHESIVE TAPE

GLASS CLOTH ADHESIVE TAPE

Product catalog summary
Description
H204 is a glass cloth adhesive tape with a thermosetting silicone adhesive, featuring a total thickness of 0.17 mm. It is designed for coil winding protection, insulation, and fixing wires before impregnation, suitable for applications requiring a thermal class H (180°C).
Applications
  • Fixing and reinforcing coils and output wires.
  • Securing wires onto carcass before impregnation.
  • Reinforcing high-temperature non-adhesive insulating materials.
  • Insulating switches, inductors, connections, and class H dry-type transformer leads.
  • Protective masking of PCBs for wave soldering.
  • Securing and splicing cables and wire harnesses.
  • Slot cell edge tapping.
  • Outer protective insulating wraps for bobbins, coils, and dry transformers.
  • Plasma spray surface protection.
Product Benefits
  • Glass cloth backing offers excellent conformability and impregnation.
  • Regular finishing on high diameter copper wires.
  • High mechanical strength.
  • Thermosetting silicone adhesive provides optimal resistance to solvents and varnishes when cured.
  • Excellent temperature resistance.
  • Easy printable carrier for branding and technical marking.
  • UL 510 approved and flame retardant.
  • Service temperature of 180°C continuous, classified as Thermal Class H.
Technical Properties
PropertyUnitNominal ValueTest Method
Total Thicknessmm0.17AFERA 4006
Tensile StrengthN/cm300AFERA 4004
Elongation at Break%8AFERA 4005
Adhesion to SteelN/cm3.8AFERA 4001
Breakdown VoltagekV2.3AFERA 4011
Insulation Resistance1.5 x 103AFERA 4010
Service Temperature°C180UL1446
Corrosion Factor-0.95-
Cross-linking Cycle-1h at 150°C – 2h at 130°C-
See more

Catalog excerpts

GLASS CLOTH ADHESIVE TAPE-1

CINTAS ADHESIVAS ESPECIALES TECHNICAL DATA DESCRIPTION H204 is a glass cloth tape coated with a thermosetting silicone adhesive with 0.17 mm total thickness and recommended for coil winding protection and insulation and fixing wires prior impregnation. (180°C thermal class H). APPLICATIONS • i Fixing and reinforcing coils and output wires, • i Fixing and securing wires onto carcass prior to impregnation, • i Fixing, reinforcing and securing high temperature non-adhesive insulating materials, • i Insulating switches, inductors, connections, class H dry-type transformers leads, • i Protective mask of PCB for wave soldering, • i Securing, splicing cables and wires harnesses, • i Slot cell edge tapping, • i Outer protective insulating wraps for bobbins, coils, dry transformers etc... • Plasma spray surface protection.

 Open the catalog to page 1
GLASS CLOTH ADHESIVE TAPE-2

• i The glass cloth backing provides very good conformability and excellent impregnation, • i Regular finishing onto high diameter copper wires, • i High mechanical strength, • i Thermosetting silicone adhesive system, which provides an optimum resistance to solvents and varnishes when fully cured in dry applications, • i Excellent temperature resistance. • i Easy printable carrier which allows your brand and the component technical features marking and identification, • i UL 510 approval - Guide OANZ 2: File E 100223, • i Flame retardant according to UL 510, • i Service temperature: 180°C continuous...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.