*mydirectindustry

ESD KAPTON TAPE

Product catalog summary

Description: The document describes an anti-static printed circuit board and conformal coating masking tape. It is based on polyimide film coated with a special surface conductive adhesive, which eliminates static generation during roll unwind and tape application. The tape can withstand wave solder temperatures up to 300°C and leaves no adhesive residue upon removal.

Physical Properties:

Supporting Base: Polyimide special construction
Base Thickness: 0.025 mm (1.0 mil) and 0.050 mm (2.0 mil)
Total Thickness: 0.060 mm (2.4 mil) and 0.085 mm (3.3 mil)
Surface Resistivity (Adhesive): 10³ - 10⁴ ohms/sq
Temperature Resistance: Up to 300°C short term
Colour: Brown opaque
Adhesive Strength: 1.0 N/cm (9.0 oz/inch) and 1.8 N/cm (16.0 oz/inch)
Adhesive Type: Silicone
Tensile Strength: 50.0 N/cm (28.0 lbs/inch) and 100.0 N/cm (56.0 lbs/inch)
Elongation: 70.0%

Note: The product is patented under the number 991008.

Catalog excerpts

ANTI-STATIC PRINTED CIRCUIT BOARD AND CONFORMAL COATING MASKING TAPE DESCRIPTION: BASED ON POLYIMIDE FILM COATED WITH A SPECIAL SURFACE CONDUCTIVE ADHESIVE. STATIC GENERATION DURING ROLL UNWIND AND TAPE APPLICATION IS ELIMINATED.IT CAN WITHSTAND WAVE SOLDER TEMPERATURES UP TO 300oC AND LEAVES NO ADHESIVE RESIDUE ON PRINTED CIRCUIT BOARDS UPON REMOVAL. PHYSICAL PROPERTIES: EN VALUE: ASTM VALUE:

Open the catalog to page 1

ESD KAPTON TAPE

ESD KAPTON TAPE

Catalog excerpts

All Distribuciones Julmarsa S.L. catalogs and technical brochures