3 PHASES POWER FACTOR CORRECTION CAPACITORS TECHNICAL SPECIFICATIONS
1 / 6Pages

Catalog excerpts

3 PHASES POWER FACTOR CORRECTION CAPACITORS TECHNICAL SPECIFICATIONS - 1

3 PHASES POWER FACTOR CORRECTION CAPACITORS TECHNICAL SPECIFICATIONS General Features: • Cylindrical Aluminum case • Low losses • Self-healing Polypropylene film. • High level of dielectric strength. • Life time: 100.000 hours • Friendly to the environment - No PCB's - Pb free Application: Power factor correction, Harmonic Filtering Construction: • Dielectric: Metallized Polypropylene film. • Overpressure disconnection system • Internal Discharge Resistors. • Cylindrical Aluminum can • Fill Material: Polypropylene resin, classification UL 94V2. • Connection: Universal screw • Fixing system: M12 bolt, nut and washer APPROVAL: TECHNICAL MANAGER 08/10/2018

Open the catalog to page 1
3 PHASES POWER FACTOR CORRECTION CAPACITORS TECHNICAL SPECIFICATIONS - 2

APPROVAL: TECHNICAL MANAGER 08/10/2018

Open the catalog to page 2
3 PHASES POWER FACTOR CORRECTION CAPACITORS TECHNICAL SPECIFICATIONS - 3

APPROVAL: TECHNICAL MANAGER 08/10/2018

Open the catalog to page 3
3 PHASES POWER FACTOR CORRECTION CAPACITORS TECHNICAL SPECIFICATIONS - 4

Overpressure disconnection system: • Mechanical fuse on cover, when a overpressure occurs the cover change its shape and disconnect the capacitor • Verified with IEC 60831-2 • The Can do not need additional folds APPROVAL: TECHNICAL MANAGER 08/10/2018

Open the catalog to page 4
3 PHASES POWER FACTOR CORRECTION CAPACITORS TECHNICAL SPECIFICATIONS - 5

Installation recommendations In order to do an appropriate installation of Capacitor's Banks you should follow below recommendations: • The Capacitor could amplify harmonic current if they are not specified appropriately. If the system has voltage harmonics higher than 5% or current harmonics higher than 20%, must install rejection reactors (IEEE 519) • In order to avoid In-rush current is recommended to install contactor with pre insertion resistors • The installation site has to keep dry • If capacitors are installed in a cabinet must install cold ventilation • Maintain at least 60 mm of...

Open the catalog to page 5
3 PHASES POWER FACTOR CORRECTION CAPACITORS TECHNICAL SPECIFICATIONS - 6

APPROVAL: TECHNICAL MANAGER 08/10/2018

Open the catalog to page 6

All Disproel catalogs and technical brochures