DISAB Industrial Vacloader Vacuum Truck SDC 100 The SDC 100, with its 220 kW suction power meets the industry’s high demands on efficiency, reliability, ease of use and maintenance. The SDC 100 is an optimum tool to handle both dry and wet material. The round tank design provides excellent performance also for liquid material. Designed to operate as a stand alone vacuum loader for work with 6” hoses but can equally well operate as a central vacuum unit connected to a fixed tube system, facilitating multi-inlet cleaning. Truck engine power supply optimises load capacity as well as economy of operation. The unit features • Sturdy design Efficient high vacuum pump (>90% vacuum) Filter system for dry & wet material with air chock filter cleaning. On board storage of hoses, pipes and tools Hydraulically operated tailgate, tailgate lock and tipping The unit is designed for the industrial environment and is easy to use for the operator. Safety at work and low maintenance cost are features included in our philosophy. The truck, Volvo FM 410 is a modern truck with a EURO 6 engine. The day cab together with the short wheelbase of 4600 mm add to a compact unit easy to manoeuvre. The 9 tonne front axle and 19 tonne boggie paired with the DISAB design provide an optimised loading capacity. Operation The suction unit is powered via a well reputed power transmission. Suction power is regulated on the units controls by adjusting the RPM of the truck. The material is normally sucked through a 6” hose, accessible at the rear of the machine, via an 8” inlet to an inlet box. (Or hose boom, option). Sucked material is separated from the air stream in several steps. First through “fall chamber” principle in the container, secondly in the filter compartment and finally in the safety filters. The filling of our 9 m³ container can continue until stopped by an automatic level guard. The fine dust, collected by the filters, is kept in a separate compartment. Unloading is done by hydraulic tipping, supported by vibrators (optional). While tipping, the filter chamber can be emptied through pneumatic opening of the filter hatch. Applications Literally anything, dry or wet, fitting into the 6” hose, can be sucked and transported into the container. Volumes sucked vary with material, distance to vacuum unit and operator. As guidance, 10 m³ of cement at a 20 meter distance would be collected within 20-25 minutes. Within reason, the capacity is independent of height differences. Our units are used by manufacturers of cement, lime, chemicals, plastics etc. Foundries, steel mills, quarries, pulp and paper, incineration plants, shipyards and power plants are other examples of users. Technical changes without notice

Technical data Vacuum pump Max. vacuum Air volume,unloaded Air volume (-500mbar) Operating speed Power Power Transmission Main filter system Safety filter system Tank Tailgate Tipping system Level guards Options • Hose boom • Vibrators • Drain valve 6” Kaeser Omega 83PV -950 mbar 8100 m3/h 7300 m3/h 1450-2700 rpm 220 kW Make OMSI 2x35 galvanized cages with filter socks in needled polyester -glazed surface, area 26m2 2 filter cartridges 34 m2 located in the machine house Gross volume 9 m3 (excl. filter chamber) Hydraulically operated and locked Hydraulical front cylinder, double acting system...