DISAB MultiFLEX™ Usage The picture shows a DISAB Futurion™ Q20 MultiFLEX. Options may vary. DISAB MultiFLEX™ is the hose arm that is specially produced and designed for vacloaders which have to perform multiple tasks within different and varied areas of application. It can involve everything from sucking up and transporting material, to using a vacuum to excavate deep down in the ground for tasks such as exposing cables and pipes. Regardless of whether the material is wet or dry, cohesive or fine-grained, it can be handled by DISAB MultiFLEX™. DISAB MultiFLEX™ can handle anything that fits in a 10” hose. DISAB MultiFLEX™ can only be featured with our DISAB Futurion™ vacloader models, which are available with suction only feature (Q10) and with suction & blow features (Q20). DISAB MultiFLEX™ is designed to be able to effectively tackle a range of challenges, everything from elevation high up along a house wall to excavating deep beneath the surface of the ground. DISAB MultiFLEX™ can be used within the same areas of application as DISAB’s other hose arms but has an additional function, excavation, which increases its flexibility and widens the vacuum loader’s range of applications. Other benefits of DISAB MultiFLEX™ are: • Safe working environment for the operator: • Optimised working area of 180° without needing to move the actual vehicle. Simple to manoeuvre at a safe distance using a joystick-radio. DISAB MultiFLEX™ is manufactured from high-tensile steel, making it lighter and simultaneously extra strong to cope with all the challenges that the market demands. It is positioned on the vacloader’s emptying hatch for the best possible reach, thus facilitating work close to and on both sides of the vacloader. Large aperture angle for simpler discharge. DISAB MultiFLEX™ is designed with five arm sections to provide a long reach within a 180° sector behind the machine. A special rotor function is located on the arm’s tool holder and it is used to increase the power and make penetrating down into the ground more effective. Reduces the risk of digging up cables, pipes etc. Equipped with a 10” wide inlet hose which delivers an increased intake capacity at short distance. Good payload capacity thanks to to DISAB MultiFLEX’s™ weight construction. Equipped with a hydraulic pump with variable displacement which leads to be

Thanks to DISAB MultiFLEX™ we can access more working areas and tackle more assignments than we could before. Sortera, Sweden Technical data sheet for DISAB MultiFLEX™ Description Material High-tensile steel Hose dimension (“) Reach backwards (from the slewing centre) (m) Excavation depth with 1.5 m extension (4 metres out from slewing centre) (m) Excavation sector (°) Lift height (2 metres out from slewing centre) (m) Tipping location Compatible with DISAB Futurion™ Q10 and Q20 vacloaders Core Function Weight & Dimension* *Weight and dimension are approximate and depend on chassis and any accessories...