Catalogs >
DIS Sensors >
QG65N-KIXv-360-CAN-C(F)M

QG65N-KIXv-360-CAN-C(F)M
2Pages

Catalog excerpts

CBModsq General specifications v20170426 Dimensions (indicative) Mounting Ingress Protection (IEC 60529) Relative humidity Weight Supply voltage Polarity protection Current consumption Operating temperature Storage temperature Measuring range Centering function Frequency response (-3dB) Accuracy (2a) Offset error Reinforced plastic injection molded (Faradex DS, black, EMI shielded by stainless steel fiber in PC) 60x50x27 mm 4x M5x25 mm zinc plated pozidrive screws included (optional: 2x 04mm positioning pins) IP67 Non linearity Sensitivity error Resolution Temperature coefficient Max mechanical shock CAN interface (hardware) CAN communication profile Baud rate Node Id TPDO messages TPDO1 event time Sync mode Heartbeat Programming options Output format Filtering_ Boot time overall 0,1° typ. < ± 0,05° typ. after centering < ± 0,1° typ. (< ± 0,15° max.) not applicable 0,01° ± 0,01°/K typ. 10.000 g CAN 2.0 A and B according to ISO 11898-1 & ISO 11898-2 CANopen, CiA301 V4.2.0 & EN 50325-4 125 kbit/s (default, range 50/125/250/500/1000 kbit/s) 01 h (range: 01h - 7Fh) TPDO1: 181h (for Node ID=01h) 50 ms (default, range 10-500 ms) On/off (default: off) On/off (default: on, 2s) Baudrate, Node Id, Event time, Sync mode, Heartbeat, Output format I nteger: -17999 to +18000 (PDO1: byte 2,1) _Output filter disabled_ < 1 s © DIS Sensors - Oostergracht 40 - 3763 LZ SOEST - The Netherlands www.dis-sensors.com Subject to change without notice

Open the catalog to page 1

Measurement orientation Rotation in vertical plane. Lateral tilt sensitivity error: < ± 0,03°/° lateral tilt (typ.) Max. lateral tilt: 45° Connectivity (length ±10%) Connection Male only or Male & Female (internal T-junction) M12 connector (5 pins, A-coding) ( CiA303 V1.8.0 ) (Brass Nickel coated, contacts copper alloy) No bus termination inside. A CANbus always has to be terminated properly. For bus termination order seperate M12 termination resistor (optional: T-connector) Pin 1: Shield Pin 2: Vcc Pin 3: Gnd & CAN_GND Pin 4: CAN_H Pin 5: CAN_L Mechanical dimensions (indicative only)...

Open the catalog to page 2