Catalogs >
DIS Sensors >
QG65-KD-030H-AV-CM

QG65-KD-030H-AV-CM
2Pages

Catalog excerpts

Housing Dimensions Mounting Ingress Protection (IEC 60529) Relative humidity Weight Supply voltage Polarity protection Current consumption Operating temperature Storage temperature Measuring range Centering function Frequency response (-3dB) Accuracy Offset error Non linearity Sensitivity error Resolution Temperature coefficient Max mechanical shock Output Output load Short circuit protection Output refresh rate Plastic injection molded housing (Faradex DS, black, EMI shielded by stainless steel fiber in PC) 60x50x27 mm 4x M5x25 mm stainless steel pozidrive screws (optional: 2x 04mm positioning pins) IP67 0 - 95% non condensing ca 110 gr 8 - 30V dc Yes < 25 mA -40 .. +85°C -40 .. +85°C ± 30° Yes (2,5 V = 0°), range: ±5° 10 Hz overall 0,05° typ. < ± 0,03° typ. (< ± 0,08° max.) after centering < ± 0,04° typ. (< ± 0,09° max.) < ± 0,03% typ. (< ± 0,08% max.) 0,01° ± 0,005°/K typ. 20.000g 0,5 - 4,5 V Rload >20kO, Cload <20 nF Yes (max 10 s) 20 ms © Dewit Industrial Sensors - Oostergracht 40 - 3763 LZ SOEST - The Netherlands www.dis-sensors.com Subject to change without notice

Open the catalog to page 1

Transfer characteristic Vout = 2,5 + 2*(α/30) [V] clipping outside measuring range Measurement orientation Default 0°: horizontal, no acceleration applied. Cross tilt sensitivity error: < (0,12 * cross tilt angle)² % typ. Note: one axis <10° tilt for max. accuracy QG65-KD-030H-AV-CM Connection Wire / pin coding Output Y Supply voltage Programming interface RS232 Rx Programming interface RS232 Tx Gnd Centering input Output X Shield Mechanical dimensions Center function Centering can be done to eliminate mechanical offsets. To execute centering connect center input to ground (>0,5sec) within...

Open the catalog to page 2