Catalogs >
DIS Sensors >
QG30-KI-090H-AI-K

QG30-KI-090H-AI-K
2Pages

Catalog excerpts

L. sensorsH-series (for demanding applications) QG30-KI-090H-AI-K Inclination sensor 1 axis horizontal/vertical mounting Output 4 - 20 mA Supply voltage 10 - 30 V dc Measuring range ± 90° Dimensions (indicative) Mounting Ingress Protection (IEC 60529) Relative humidity Weight Supply voltage Polarity protection Current consumption Operating temperature Storage temperature Measuring range Centering function Frequency response (-3dB) Accuracy (2a) Offset error Non linearity Sensitivity error Resolution Temperature coefficient Max mechanical shock Output Output load Short circuit protection Repeatability Plastic injection molded housing (Quadro30, PBTP black) 30x30x15 mm 2x M3x16 mm zinc plated steel pozidrive screws included IP67 0 - 100% approx. 15 gram (cable excluded) 10 - 30 V dc Yes < 30 mA ( excluding output signal ) -25 .. +80 °C -25 .. +80 °C ± 90° No 0 - 18 Hz (±10 Hz) overall 0,9° typ. (offset excluded) (-45°..+45°) < ± 1° typ. (< ± 3° max.) < ± 0,6° (-45°...+45°) < ± 2% typ. (< ± 3.5% max.) 0,01° ± 0,01°/K typ 20.000g 4 - 20 mA Rload < (50*Vs-300) [Q] (Eg: Vs = 24 V: Rload < 900 Q) Yes (max 10 s) 0,1° © DIS Sensors - Oostergracht 40 - 3763 LZ SOEST - The Netherlands www.dis-sensors.com Subject to change without notice

Open the catalog to page 1

Measurement orientation The QG30 can be used in both vertical and horizontal (round nose upwards) mounting position. Connectivity (length ±10%) Connection Wire / pin coding 2 m PVC/PVC Liyy, black Ø 4,6 mm, wires: 3x0,34 mm² Sensor colors (static usage) Brown Black Blue + Supply Voltage Output Gnd Mechanical dimensions (indicative only) Remarks As this device is accelerometer-based the sensor is inherent sensitive for accelerations/vibrations. Application specific testing must be carried out to check whether this sensor will fulfil your requirements. © DIS Sensors - Oostergracht 40 - 3763...

Open the catalog to page 2