Meltio Material Datasheet Rev 2.0 Meltio Nickel 718 ERNiFeCr-2/S Ni 7718/2.4667 Nickel 718 is a highly versatile and corrosion-resistant alloy with exceptional mechanical properties at both high and low temperatures. Its ability to withstand harsh environments and high-stress applications has made it a popular choice across a range of industries, including aerospace, energy, and marine. Being Nickel 718 a difficult alloy to work using conventional methods, 3D Printing facilitates its usage for a broader range of applications.

Meltio Material Datasheet Tomography Computed Tomography Scan of 3D printed sample part in Inconel 718 without detectable voids or defects. Resolution of 24 pm per pixel. In the as-printed state of Nickel 718, delta-phase dendrites have been observed within the gamma nickel matrix. Under higher magnification, the presence of intermetallic phases and gamma prime has been noted. Relative density as 3D printed Mechanical Properties Results show that specimens printed using Meltio’s wire-laser metal 3D printed perform at the same level as samples made with conventional manufacturing methods. As-printed...