100A BIDIRECTIONAL SURFACE MOUNT THYRISTOR SURGE PROTECTIVE DEVICE Mechanical Data 100A Peak Pulse Current @ 10/1000μs 400A Peak Pulse Current @ 8/20μs 58 - 320V Stand-Off Voltages Oxide-Glass Passivated Junction Bidirectional Protection In a Single Device High Off-State Impedance and Low On-State Voltage Helps Equipment Meet GR-1089-CORE, IEC 61000-4-5, FCC Part 68, ITU-T K.20/K.21, and UL497B UL Listed Under Recognized Component Index, File Number 156346 Lead Free Finish/RoHS Compliant (Note 1) Green Molding Compound (No Halogen and Antimony) (Note 2) Case: SMB Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 Polarity: None; Bidirectional Devices Have No Polarity Indicator Weight: 0.093 grams (approximate) Bottom View Packaging 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. 2. Product manufactured with Data Code 0924 (week 24, 2009) and newer are built with Green Molding Compound. 3. For packaging details, go to our website at http://www.diodes.com. Marking Information xxxxx = Product type marking code (See table on page 2) = Manufacturers’ code marking YWW = Date code marking Y = Last digit of year (ex: 6 for 2006) WW = Week code (01 to 53)

Maximum Ratings @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Non-Repetitive Peak Impulse Current Non-Repetitive Peak On-State Current Typical Positive Temperature Coefficient for Breakdown Voltage Symbol Ipp ITSM ΔVBR/ΔTJ Symbol RθJL RθJA TJ TSTG Thermal Characteristics Characteristic Thermal Resistance, Junction to Lead Thermal Resistance, Junction to Ambient Junction Temperature Range Storage Temperature Range Notes: 4. Applied 6kV, 10/700μs waveform IPP, PEAK PULSE CURRENT (%) Maximum...

Electrical Characteristics @TA = 25°C unless otherwise specified Maximum Off-State Leakage Current @ VDRM Maximum Breakover Voltage Maximum On-State Voltage @ IT = 1A Part Number Maximum Rated Repetitive Off-State Voltage Symbol VDRM IDRM VBR IBR VBO IBO IH VT IPP CO Notes: Typical Off-State Capacitance Marking Code Parameter Stand-off Voltage Leakage current at stand-off voltage Breakdown voltage Breakdown current Breakover voltage Breakover current Holding current (Note 5) On state voltage Peak pulse current Off-state capacitance (Note 6) 5. IH > (VL/RL) If this criterion is not obeyed, the...

TB0640H - TB3500H 1.2 NORMALIZED BREAKDOWN VOLTAGE I(DRM), OFF-STATE CURRENT (uA) 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Fig. 1 Off-State Current vs. Junction Temperature NORMALIZED BREAKDOWN VOLTAGE -25 0 25 50 75 100 125 150 175 TJ, JUNCTION TEMPERATURE (°C) Fig. 2 Relative Variation of Breakdown Voltage vs. Junction Temperature 0.95 25 50 75 100 125 150 175 0 -50 -25 TJ, JUNCTION TEMPERATURE (ºC) Fig. 3 Relative Variation of Breakover Voltage vs. Junction Temperature 1.4 5 2 2.5 3 3.5 4.5 4 VT, ON-STATE VOLTAGE (V) Fig. 4 On-State Current vs. On-State Voltage 1.5 NORMALIZED HOLDING...

Package Outline Dimensions B

IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document...