AC-E725
1Pages

Grupo DK DINAKSA Soluciones en pesaje industrial TECHNICAL FEATURES Anticollision AC E725 HUp to 10 or 30 meters. Specially designed to prevent and avoid collisions between overhead trolleys bridges. The anticollision system reduces maintenance costs, providing greater safety. Maintenance free, it is a simple, fast, easy installation and programming device. Equipped with a single microprocessor, it has red LCD display with 5 digits, 3 buttons for programming and 5 high luminosity LEDs that act as status The equipment has three programmable relays (from 0,2m up to 10m or from 0,2m up to 30 m) that are used as distance limits: Relay 1: Cuts the fast speeds Relay 2: Cuts the movement Relay 3: Reserved These three relays can act instantaneously or delayed, both in activation and deactivation, as necessary. It has a reduced size and weight, which increases the integrity and reliability of the equipment when it is subjected to vibrations or falls. The electronics has fault detection, if the laser sensor presents any defect or one of the cables is broken. ELECTRONIC E725 TECHNICAL DATA SENSOR LASER 3 programmable outputs with SPDT relay potential free (6A / 250Vac) and timer. Sensor input in 4-20 mA Dimensions: 90mm (L) x 72 mm (W) x 70mm (D) Operating temperature: from -20°C up to 60°C 3 programming buttons (SI, S2, S3) Red LCD display with 5 digits 5mm high. 5 status indicators: on, stability, limit with 3 programmable setpoints. Power supply(option 1): 90 to 240 Vac - 50Hz/60Hz (option 2): 24 to 75Vcc or 18 to 48Vac - 50Hz / 60Hz (option 3): 12Vdc Installation on a DIN rail. Power: 2.1 W Power consumption: from 10 up to 30 Vdc Electrical connection type: M12 connector, 5 pin Light source: Red laser Protection class 2 (EN 60 825-1) Distance from the light point: 15mm X 15mm (10m) Resolution: 1mm Output speed: 4 m / s Working range for 10m: from 200mm up to 10.000mm (from 0,2m up to 10m) Working range for 30m: from 200mm up to 30.000mm (from 0,2m up to 30m) Operating temperature: from -30°C up to 65°C Storage temperature: from -40°C up to 75 °C Max. Relative Humidity (Acc. Condens.): <95% Degree of protection: IP65 Resistance to Vibration: EN 60068-2-6 /-2-64 Impact resistance: EN 60068-2-27 / -2-29 Average service life (MTTF at 25° C): lOO.OOOh Analog output: 4-20 mA Resolution of the analog output: 16 bits Dinaksa Pesaje Industrial S.L.U. reserves the right to change these specifications without notice