Exchangeable cover – Industrial Ethernet D-Series
34Pages

SWISS PRECISION LASER DISTANCE SENSORS Exchangeable cover – Industrial Ethernet D-Series Technical Reference Manual Take precaution against electrostatic discharge (ESD) The exchangeable cover with Industrial Ethernet is a sensitive electronic part and can be damaged by electrostatic discharge. Only handle the device properly grounded and with care. No warranty will be granted on improper handling and / or ESD caused problems.

LASER DISTANCE SENSORS Exchangeable cover – Industrial Ethernet Technical Reference Manual

LASER DISTANCE SENSORS 1 Document scope This document covers the Dimetix exchangeable covers with Industrial Ethernet. The available types are listed in chapter 4.1 Specifications. The following topics are discussed: Safety instructions Technical information The Dimetix Exchangeable covers with Industrial Ethernet are intended to be used solely in conjunction with the D-Series laser sensor. The exchangeable cover with Industrial Ethernet can only be used in conjunction with a D-Series laser sensor. For this reason all of the safety instructions mentioned in the Technical Reference Manual of...

LASER DISTANCE SENSORS Means that the device can be damaged by electrostatic discharge, if precautions are not taken. 2.2 Permitted use The permitted use of the exchangeable cover with Industrial Ethernet is: Expand D-Series laser sensor with Industrial Ethernet capabilities. 2.3 Prohibited use / Limits to use Prohibited use or ignoring limits to use can lead to injury, malfunction, and material damage. It is the duty of the person responsible for the instrument to inform the user about hazards and how to counteract them. The exchangeable cover with Industrial Ethernet must not be operated...

LASER DISTANCE SENSORS 2.4 Areas of responsibility Responsibilities of the manufacturer of the original equipment Dimetix AG, CH-9100 Herisau (Dimetix): Dimetix is responsible for supplying the product, including the Technical Reference Manual and original accessories, in a completely safe condition. Responsibilities of the manufacturer of non-Dimetix accessories: The manufacturers of non-Dimetix accessories for the exchangeable cover with Industrial Ethernet are responsible for developing, implementing and communicating safety concepts for their products. They are also responsible for the...

LASER DISTANCE SENSORS 2.7 Electrostatic discharge (ESD) Take precaution against electrostatic discharge (ESD) The exchangeable cover with Industrial Ethernet is a sensitive electronic part and can be damaged by electrostatic discharge. Only handle the device properly grounded and with care. No warranty will be granted on improper handling and / or ESD caused problems. 2.8 Producer standards Dimetix hereby certifies that the product has been tested and complies with the specifications as stated in this 'Technical Reference Manual'. The test equipment used is in compliance with national and...

LASER DISTANCE SENSORS 3 Introduction The exchangeable cover with Industrial Ethernet is an optional and powerful extension of the D-Series laser sensors with the most popular Industrial Ethernet protocols – PROFINET®, EtherNet/IP™ and EtherCAT®. It's possible to assemble the exchangeable cover with Industrial Ethernet to almost all of the D-Series laser sensor. Most popular Industrial Ethernet interfaces available – PROFINET®, EthernNet/IP™ and EtherCAT® Simple assembling of the optional Industrial Ethernet interfaces to a D-Series laser sensor Compact design of the exchangeable cover with...

LASER DISTANCE SENSORS 3.2 Components The components of the exchangeable cover with Industrial Ethernet interfaces are marked in figure 2. 1) Screws, Philips Slotted Combo (Philips size 1, slot size 2) 2) Industrial Ethernet protocol status LED's 3) Ribbon cable to connect exchangeable cover to D-Series devices 4) Ethernet port 1 status LED's (Link, activity) 5) Ethernet port 0 status LED's (Link, activity) 6) Product label (for more details, see chapter 2.10) 7) Ethernet port 1 8) Valve diaphragm 9) Ethernet port 0 10) Power supply (for D-Series device and exchangeable cover) Figure 2:...

LASER DISTANCE SENSORS 4 Technical data 4.1 Specifications PROFINET® Protocol specific Designator Specification Part number Industrial Ethernet Number of ports Data rate 2 100 Mbit/s (Full duplex) Power supply (D-Series device incl. Industrial Ethernet) Voltage range Current consumption (@ 24 VDC) 1) Current consumption (@ 12 VDC) 1) Temperature range during operation Temperature range during storage Relative humidity (operation / storage) Degree of protection Dimensions IP65 (only if correct assembled with a D-Series sensor and connected ports) 90 g (with ribbon cable) Polycarbonate...

LASER DISTANCE SENSORS 5 Electrical interfaces The main electrical components of the exchangeable cover with Industrial Ethernet are described in the following chapter. The overview of the relevant components are labeled in figure 3. 1) Ribbon cable (20 pin) to connect exchangeable cover with Industrial Ethernet to D-Series devices 2) Industrial Ethernet protocol status LED's 3) Ethernet port 1 status LED's: LINK, ACT or L/A 4) Ethernet port 0 status LED's: LINK, ACT or L/A 5) Ethernet port 1 (M12 socket female, 4 pin, D coded) 6) Ethernet port 0 (M12 socket female, 4 pin, D coded) 7) Power...

LASER DISTANCE SENSORS Only use high-quality power supply equipment and consider the voltage and current requirements of the exchangeable cover with Industrial Ethernet. For trouble-free operation it's recommended to use a separate power supply for the sensors. 5.2 Ethernet ports The connector for the Ethernet ports (M12 socket, D coded) are shown in figure 5. There are two Ethernet ports for the Industrial Ethernet functionality available. How the Ethernet ports work depends on the Industrial Ethernet protocol. For more details see the protocol specific part in this manual. The metal cases...

LASER DISTANCE SENSORS Plastic cover The connection of the exchangeable cover with Industrial Ethernet to a DSeries sensor is done with the ribbon cable of the exchangeable cover. Aluminium housing Ribbon cable of exchangeable cover: • Power supply Exchangeable cover Industrial Ethernet Figure 6: Connection diagram of exchangeable cover with Industrial Ethernet and D-Series sensor D-Series sensor Optional Industrial Ethernet interface 20 conductors with codded connectors Length 60 mm with connectors The signals of the ribbon cable are not specified explicitly at this point. The optional...