CABLE TRAYS

Product catalog summary

Overview
DIMECO, established in 1967, specializes in manufacturing flexible lines for continuous production of metallic parts, specifically cable trays. Their systems are designed to handle various widths and heights by adjusting the coil and rollforming width, ensuring efficient production.

Description
The cable tray manufacturing lines can start from blanks or coils, offering solutions that are electronically controlled for precise feeding, punching, and cutting. These lines are tested at real speed in the factory before delivery.

Standard Equipment
The press feeding line is customizable with over 50 machines and 200 options to fit specific applications.

Flexipress® Features

CNC high-speed punching system
Compact structure with an eccentric shaft and load
Greasing system located in the lower part
Tools are pre-set on the table and can be operated by a selector
Operates up to 130 strokes per minute and supports up to 150 tons

Rollforming
The system typically includes two Duplex or Twin roll forming machines for adjusting heights and widths. The Duplex system centers the tray, adjusting the sides as needed.

Shear and Narrowing System
Shearing can occur before or after rollforming, equipped to handle different widths. A narrowing system may be used to facilitate connecting tray parts.

Specifications

Tray dimensions: up to 1000 mm wide, 100 mm high, and 2 mm thick
Production speed: 15 m/min for narrow trays, 8 m/min for wide trays

Line Structure

Dimensions: approximately 30 x 6 meters
Includes a 6.5-ton decoiler, straightener, electronic feeder, Flexipress®, two roll forming machines, and shear
Safety enclosure compliant with CE standards

Catalog excerpts

CABLE TRAYS FLEXILINES FLEXIBLE MANUFACTURING SYSTEMS

Open the catalog to page 1

CABLE TRAYS Founded in 1967, DIMECO manufactures flexible lines for continuous metallic parts production Description Starting from blanks or working from coil, DIMECO propose different solutions for cable trays manufacturing. The lines we proposes allow industrializing any type of cable tray. Our lines are suitable to manufacture cable trays, in different widths and heights, by just changing the coil and rollforming width. The whole line is electronically controlled, in order to ensure the right feeding, punching and cutting is achieved. The lines are tested in our factory at real speed before...

Open the catalog to page 2

ROLLFORMING FLEXIBLE Line highlights • All the necessary tooling may be set on the press table. • CNC controlled press. • Normal obtained speed: 15 m/min for narrow trays and 8 m/min for wide trays. Line Structure • Approximate dimensions: 30 x 6 m • 6.5 t decoiler • Straightener • Press electronic feeder • Flexipress® (120 s/min) • 2 roll forming machines • Shear. • Peripheral safety enclosure, according to CE standards.

Open the catalog to page 3