GasSafetyMonitor
3Pages

Catalog excerpts

Measuring devices Room gas monitoring devices The central management, supply and control unit displays the measured values and messages of the connected Sensors which measure the concentration of different gases in ambient air. The Monitor allows to display and record the measured values as well as to register messages. The potential-free relays serve for controlling further warning systems. Up to 32 Sensors can be controlled and monitored. Thanks to the well-proven DILO operating and setting principle, important data, warning and alarm limit values can be retrieved. The installation and maintenance of the Sensors via the plug-and-play concept makes handling very comfortable. Measured values and messages are stored and can be retrieved on the 7" colour touch screen, if necessary. Special features ■ Gas type: SF6 ■ Gas type: C4-FN ■ Gas type: O2 ■ Gas type: CO2 ■ Gas type: SO2 ■ Gas type: CO

Open the catalog to page 1

Advantages & functions ■ different acoustic warning, alarm and error signals ■ coloured visual messages on both the Monitor and the Sensor ■ registration of all messages in the device ■ individual naming of the Monitor and connected Sensors ■ permanent display of the measured values, control and settings of all connected Sensors ■ Sensors are connected via an RJ45 cable (Ethernet and Power over Ethernet (PoE)) ■ up to three Sensors can be connected and supplied directly via the Monitor ■ the additional Sensors can be connected via a PoE injector switch until the maximum number is reached ■...

Open the catalog to page 2

Note Note: The Monitor can directly supply up to three Sensors without their own power supply. If more than three sensors are required, a maximum of two sensors can be connected to the monitor. The third connection is required for a PoE switch connected downstream that integrates additional sensors. A fourth RJ45 connector on the monitor is provided for connection to an external network (e.g. network for substations IEC 61850). An RJ45 Ethernet cable is necessary per connected Sensor (3-026-R205 - 235). It is also possible to combine different Sensor types with each other, if desired.

Open the catalog to page 3

GasSafetyMonitor 3Pages

Catalog excerpts

All DILO Armaturen und Anlagen GmbH catalogs and technical brochures

GasSafetyMonitor
3Pages