6-1092-R001 Transition piece

Product catalog summary

Overview: The document describes the specifications and features of DN40 couplings, which are used to establish connections by fitting coupling parts together. The couplings are pressure- and vacuum-tight, sealed with an O-ring, and automatically shut off when separated.

Specifications:

Temperature resistance: -40 °C to +80 °C
Leak rate: 1 x 10^-6 mbar l/s
Materials: Brass and Stainless Steel (DIN EN 2.0401 and DIN EN 1.4305)
Nominal pressure: PN (in bar)
Nominal width: DN40 one-sided, DN20 one-sided
Gas type: SF₆

Optional Accessories:

VK/FL-01/40 E Flange coupling
VK/A-02/40 E Coupling groove part
VK/F-02/20 E Coupling tongue part
VK/KN-04/20 E Covering cap for coupling groove part DN20

Additional Notes: The actual product may differ slightly from the image provided. Suitable connecting parts must be ordered separately.

Catalog excerpts

The coupling allows to establish a connection by simply fitting both coupling parts into each other. Before load relieving of the coupling seats the pressure- and vacuum tight coupling is sealed inside with an 0-ring during the coupling process. The coupling is forced to be open in coupled position. If both coupling sides are separated again the sealing seats shut o automatically. All couplings are temperature-resistant from -40 °C to +80 °C. DILO couplings DN40 have a leakrate of 1x1 O'6 mbar I/s. The suitable connecting parts for DILO couplings must be ordered separately. Technical data

Open the catalog to page 1