05-1545-R007 - Angle piece

Product catalog summary

Overview: DILO soldering unions are primarily used in factory fabrication area piping. They offer a variety of unions with options for soldering connections on both ends or a combination of soldering and screw-in thread connections.

Specifications: These unions can withstand pressures up to 64 bar and are available in different materials to suit various applications. The tube outside diameter is 42 mm, with a nominal pressure of 25 bar. Other dimensions include d2 at 39 mm, L1 at 45 mm, and h7 at 20 mm. The material used is brass, compliant with DIN EN 2.0401 standards.

Key Features: The unions are designed for high vibration resistance and require separate ordering of suitable connecting parts for DILO couplings. The product image may not exactly match the actual product.

Gas Type: The unions are suitable for use with SF6 gas.

Catalog excerpts

Soldering unions DILO soldering unions are particularly used in factory fabrication area piping. DILO o ers a very wide variety of unions. Soldering unions are available either with soldering connections on both ends where the highest vibration resistance is required or with a soldering connection on one end and a screw in thread on the other. DILO soldering unions withstand pressures up to 64 bar. Different materials are available for all applicatons. The suitable connecting parts for DILO couplings must be ordered separately. Technical data

Open the catalog to page 1

All DILO Armaturen und Anlagen GmbH catalogs and technical brochures

Archived catalogs

Company brochure
23 Pages