Specifications:
The document provides specifications for various nominal diameters (ND) and nominal lengths (Ln) of components, with details on drilling standards such as NF EN 1092-1, NF EN 1759-1/ASME B16.5. It includes maximum working pressure (W.P.) and permissible movements for different pressure ratings (PN 10, PN 16, PN 20, CL150).

Procedures and Standards:
Drilling standards are specified, with additional options available (e.g., PN 6, PN 25, PN40, CL300, B.S.10D, B.S.10E). The document mentions the use of floating flanges in zinc-chromated or stainless steel (316L).

Recommendations:
Particular cases for DW and CC grades are highlighted, with specific working pressures and temperatures. The document also outlines the inner lining grades and their corresponding working temperature ranges.

Key Data from Tables:
The tables provide detailed measurements for each nominal diameter, including permissible movements, end thrust for P=1 bar, and approximate weight of steel flanges. The document specifies that maximum values do not apply simultaneously.

Contact Information:
Anvis Decize S.A.S., located at 12 rue Henry Darcy, 58300 DECIZE, France. Contact via email at [email protected] or visit www.dilatoflex.com.

Additional Notes:
This is a non-binding document from Anvis, dated 10/2025, covering components with nominal lengths of 150, 200, and 300 mm.