Catalogs >
DILAS >
Vertical Stacked Arrays Conduction-Cooled

Vertical Stacked Arrays Conduction-Cooled
2Pages

Catalog excerpts

Vertical Stacked Arrays Conduction-Cooled - 1

Features - QCW operation - Hard soldering (AuSn) Device Specification Optical Parameters1 Output Power3 Number of Bars Slope Efficiency Spectral Width (FWHM) Wavelength Temp. Coefficient Power Conversion Efficiency Storage Temperature Range Recommended Heatsink Capacity per Bar Pulse Length5 Thermal Parameters Operating Temperature Range6 6 Data at 20°C heat sink temperature. Custom configurations on request. 3 Reduced lifetime if used above nominal operating conditions. 4 For higher bar count, refer to vertical stack QCW datasheets. 5 Custom pulse length/duty cycles on request. 6 A non-condensing environment is required for storage and operation below the ambient dew point. 2

Open the catalog to page 1

Vertical Stacked Arrays Conduction-Cooled - 2

Package Dimension VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION! CLASS 4 LASER PRODUCT IEC 825-1 610584 ©2012 DILAS. All rights reserved. DILAS reserves the right to change product specifications without notice. For handling precautions, please reference the general handling instruction manual. For complete details, please contact your local DILAS sales representative or visit our website at www.DILAS.com. Europe DILAS Diodenlaser GmbH Galileo-Galilei-Straße 10 55129 Mainz Germany Phone: +49 (6131) 9226 0 Fax: +49 (6131) 9226 257 Email:...

Open the catalog to page 2

Vertical Stacked Arrays Conduction-Cooled 2Pages

Catalog excerpts

All DILAS catalogs and technical brochures

Vertical Stacked Arrays Conduction-Cooled
2Pages