Catalogs >
DILAS >
Liquid-Cooled, Modestrip SMA/SMA Fiber (200µm)

Liquid-Cooled, Modestrip SMA/SMA Fiber (200µm)
1Pages

Catalog excerpts

Liquid-Cooled, Modestrip SMA/SMA Fiber (200µm) - 1

Liquid Cooled Modestrip SMA/SMA Features - Free standing fiber tip - High centricity - Water cooling Device Specification Parameter Units Liquid Cooled Modestrip SMA 905 Input Side, with Free Standing Fiber Tip, SMA 905 on Output Side. Connector Type Ferule Diameter Outer Diameter mm (largest diameter at connector) Cable Diameter Numerical Aperture Long Term Bending Radius (Coil Radius)2 Short Term Bending Radius2 Flow Rate Cooling Water Temperature Others available upon request. For 200µm fiber core. U.S. CFR Regulation The manufacturer and subsequent sale of laser equipment is under the guidelines governed by the U.S. Center for Devices and Radiological Health (CDRH). In accordance to those guidelines, specifically Subchapter J of the Radiation Standards, 21 CFR, the diode laser is registered as a CLASS 4 laser product. VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION! CLASS 4 LASER PRODUCT IEC 825-1 610584 European Commission In accordance to EN 60825, Safety of Laser Products, the diode laser is registered as a CLASS 4 laser product. Products specifications are subject to change without notice. For handling precautions, please reference the general handling instruction manual. For additional information, please contact your local sales representative or visit our website at www.dilas-ils.com. DILAS Industrial Laser Systems a division of DILAS Diodenlaser GmbH Galileo-Galilei-Straße 10 55129 Mainz Germany Phone: +49 (6131) 9226 400 Fax: +49 (6131) 9226 444 Email: sales@dilas-ils.com www.DILAS-ILS.com

Open the catalog to page 1

Liquid-Cooled, Modestrip SMA/SMA Fiber (200µm) 1Pages

Catalog excerpts

All DILAS catalogs and technical brochures

Liquid-Cooled, Modestrip SMA/SMA Fiber (200µm)
1Pages